# Rotating Ellipse Array

**URL:** <https://forum.dynamobim.com/t/rotating-ellipse-array/72477>\
**Category:** Geometry\
**Tags:** revit, dynamo\
**Created:** [January 20, 2022, 5:52pm UTC](https://forum.dynamobim.com/t/rotating-ellipse-array/72477 "2022-01-20T17:52:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![1074709](https://avatars.discourse-cdn.com/v4/letter/1/8c91f0/32.png) [@1074709](https://forum.dynamobim.com/u/1074709)\
**Post date:** [January 20, 2022, 5:52pm UTC](https://forum.dynamobim.com/t/rotating-ellipse-array/72477/1 "2022-01-20T17:52:31Z")

</div>

Hello there, I have an elliptical array all in dynamo and I need to rotate the array so that it stands vrtically to match the ellipse I made in Revit. Also, I have a family used in the array, how will this rotation affect the array, Although the family follows the array it’s not set at correct rotation anyway.

Your help is super valuable!

 ![ellipse_rotation1](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/0/10dc962c435b68c403a6645b140e380dbeb5d038.png)  
 ![ellipse_rotation2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/c/4c4b5be4484f0d3f04e08bd8d1ec463e327815f3.jpeg)  
 ![ellipse_rotation3](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/4/5426ba69f50c3dc02a857b382003d46ba629f3da.png)  
 ![ellipse_rotation4](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/7/577eb9c2fb4ca6f732d89c2208d2bdc7ee260502.jpeg)