# Roof perimeter

**URL:** <https://forum.dynamobim.com/t/roof-perimeter/110670>\
**Category:** Revit\
**Tags:** geometry, dynamo\
**Created:** [June 10, 2025, 3:26am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670 "2025-06-10T03:26:44Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kanon](https://avatars.discourse-cdn.com/v4/letter/k/278dde/32.png) [@Kanon](https://forum.dynamobim.com/u/Kanon)\
**Post date:** [June 10, 2025, 3:26am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/1 "2025-06-10T03:26:44Z")

</div>

Good evening, everyone. I’m working on a project where I want to get the outer perimeter of the roofs of any type of house. Is there any node or functional logic for this?

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [June 10, 2025, 4:15am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/2 "2025-06-10T04:15:00Z")

</div>

Hi @Kanon maybe something here could work

 ![Skærmbillede 2025-06-10 061356](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/9/096463835fd8090981fa6461190086af08a7759c.png)

---

<div class="post-metadata">

**Author:** ![Kanon](https://avatars.discourse-cdn.com/v4/letter/k/278dde/32.png) [@Kanon](https://forum.dynamobim.com/u/Kanon)\
**Post date:** [June 10, 2025, 6:08am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/3 "2025-06-10T06:08:42Z")

</div>

This routine is very similar to the one I did, but for more complex roofs, it becomes flawed. It is extremely useful for roofs of simple houses, but when I have more complex roofs like in the image, some problems occur.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/1/b11586444e8a5a2fdd189a3ca0f7aec9e286ec53.jpeg)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [June 10, 2025, 6:10am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/4 "2025-06-10T06:10:18Z")

</div>

could you share that rvt with only roofs

---

<div class="post-metadata">

**Author:** ![\_Vijay](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/_vijay/32/91307_2.png) [@\_Vijay](https://forum.dynamobim.com/u/_Vijay)\
**Post date:** [June 10, 2025, 6:17am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/5 "2025-06-10T06:17:37Z")

</div>

How about the ‘Area’ parameter? Is this parameter incorrect?

Edit: It looks correct to me.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/b/dbce201862c54dca92a8fe9cbcd8bd32f6d1837c.png)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [June 10, 2025, 6:51am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/6 "2025-06-10T06:51:55Z")

</div>

> [@Kanon](#):
>
> This routine is very similar to the one I did, but for more complex roofs, it becomes flawed.

There will always be ways to make any geometric identification method invalid. As such there needs to be some manor of standard modeling procedure or control to identify what you are after, or to start a collection of roofs which have every identifiable edge case and build the routine around that.

The most consistent base I have seen is to take the top faces (not surfaces) and compare the normals of the adjacent edges. Any edge which has an adjacent face with a normal that doesn’t have a Z component is an edge.

Short of that we need the modeling standards defined or a sample containing all the edge cases to build the solution around.

---

<div class="post-metadata">

**Author:** ![Kanon](https://avatars.discourse-cdn.com/v4/letter/k/278dde/32.png) [@Kanon](https://forum.dynamobim.com/u/Kanon)\
**Post date:** [June 10, 2025, 6:52am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/7 "2025-06-10T06:52:11Z")

</div>

It’s a house project, I chose this one because it seems quite complete and if I can create a routine for it, it will work on all roofs.

> **[project roof](https://wetransfer.com/downloads/afb8fc2f66ed31510d7696b17592700d20250610065105/b6cf7c?t_exp=1749624665&t_lsid=ffb5e59b-dc8e-465f-bd70-67691c732315&t_network=link&t_rid=ZW1haWx8YWRyb2l0fDViMDg4ZjcyLTI4ZGUtNGM3Yi04MTYxLWUwOTc3Mzk1YjBkMA==&t_s=download_link&t_ts=1749538294)**
>
> 1 file sent via WeTransfer, the simplest way to send your files around the world

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [June 10, 2025, 7:04am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/8 "2025-06-10T07:04:06Z")

</div>

What is the goal after you select the perimeter?

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [June 10, 2025, 7:14am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/9 "2025-06-10T07:14:46Z")

</div>

![Skærmbillede 2025-06-10 091401](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/d/ed6df518a1e99c9739a7565f25ba45b77249275b.png)

---

<div class="post-metadata">

**Author:** ![Kanon](https://avatars.discourse-cdn.com/v4/letter/k/278dde/32.png) [@Kanon](https://forum.dynamobim.com/u/Kanon)\
**Post date:** [June 10, 2025, 7:28am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/10 "2025-06-10T07:28:26Z")

</div>

I want to place pipes between points of the project, on the outside of the house. I was trying to use the walls as a delimitation, but I couldn’t do it efficiently and automatically, now I’m trying to project the roofs.

---

<div class="post-metadata">

**Author:** ![Kanon](https://avatars.discourse-cdn.com/v4/letter/k/278dde/32.png) [@Kanon](https://forum.dynamobim.com/u/Kanon)\
**Post date:** [June 10, 2025, 7:32am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/11 "2025-06-10T07:32:43Z")

</div>

That’s good, maybe I can use this to eliminate those little internal contours that are left. But that already helps me a lot, thank you very much!

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [June 10, 2025, 7:49am UTC](https://forum.dynamobim.com/t/roof-perimeter/110670/12 "2025-06-10T07:49:11Z")

</div>

> [@Kanon](#):
>
> those little internal contours that are left

not sure i understand there shouldnt be something left…but as you see i filter sloped glazing roof out you have in same place as the basic roofs…if you want perimeter from that you could try element sketch from spring as probably could work on basic roof as well, in that case here
