# Rhynamo coordinates doesn't macth

**URL:** <https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479>\
**Category:** Packages\
**Tags:** revit, rhynamo, dynamo\
**Created:** [May 11, 2020, 9:42am UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479 "2020-05-11T09:42:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hiroppu](https://avatars.discourse-cdn.com/v4/letter/h/f0a364/32.png) [@Hiroppu](https://forum.dynamobim.com/u/Hiroppu)\
**Post date:** [May 11, 2020, 9:42am UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479/1 "2020-05-11T09:42:45Z")

</div>

Hello. Konnichiwa.  
I tried to use Rhynamo , but it doesn’t read correct coordinates of Rhino’s lines.  
How to work them correctly?  
I need a teacher for Rhynamo…  
thank you.

 ![missingcap](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/6/866a94cdd477177246aa7a22216934f5f4cd1898.png)

[3Dtop2.3dm](https://forum.dynamobim.com/uploads/short-url/u0vXiqMjk8mAfNKWXcAjwb7Fh46.3dm) (664.5 KB)

---

<div class="post-metadata">

**Author:** ![Ewan\_Opie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/ewan_opie/32/77070_2.png) [@Ewan\_Opie](https://forum.dynamobim.com/u/Ewan_Opie)\
**Post date:** [May 12, 2020, 2:29am UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479/2 "2020-05-12T02:29:31Z")

</div>

Can you post your Rhino file? or a download link to it for testing?

---

<div class="post-metadata">

**Author:** ![Hiroppu](https://avatars.discourse-cdn.com/v4/letter/h/f0a364/32.png) [@Hiroppu](https://forum.dynamobim.com/u/Hiroppu)\
**Post date:** [May 12, 2020, 4:19am UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479/4 "2020-05-12T04:19:50Z")

</div>

thank you for reply Mr.Ewan\_Opie.  
I finally could post Rhino file on the first article.

added：：：  
The file I posted is shrinked model from the model of images I posted, because it was too large for post.

---

<div class="post-metadata">

**Author:** ![Ewan\_Opie](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/ewan_opie/32/77070_2.png) [@Ewan\_Opie](https://forum.dynamobim.com/u/Ewan_Opie)\
**Post date:** [May 12, 2020, 10:39pm UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479/5 "2020-05-12T22:39:12Z")

</div>

I cannot see any geometry in your test file, are you sure it contains members?

I have tested the same workflow with a 3dm file sample I use, and can see geometry.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/6/962a57496c68e99aca4103ca282d5746b3dafbcc.png)

---

<div class="post-metadata">

**Author:** ![Hiroppu](https://avatars.discourse-cdn.com/v4/letter/h/f0a364/32.png) [@Hiroppu](https://forum.dynamobim.com/u/Hiroppu)\
**Post date:** [May 12, 2020, 11:30pm UTC](https://forum.dynamobim.com/t/rhynamo-coordinates-doesnt-macth/50479/6 "2020-05-12T23:30:48Z")

</div>

Thank you for your pointing out.  
I have erased too much…  
Here is the correct model contains geometry as “Line”.

[3Dtop3.3dm](https://forum.dynamobim.com/uploads/short-url/4qGscUiypfteGO4IyXHfC7sXmG.3dm) (2.3 MB)
