# Revit structural framing from Dynamo lines

**URL:** <https://forum.dynamobim.com/t/revit-structural-framing-from-dynamo-lines/37872>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [July 2, 2019, 11:56pm UTC](https://forum.dynamobim.com/t/revit-structural-framing-from-dynamo-lines/37872 "2019-07-02T23:56:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kmsaaf](https://avatars.discourse-cdn.com/v4/letter/k/82dd89/32.png) [@kmsaaf](https://forum.dynamobim.com/u/kmsaaf)\
**Post date:** [July 2, 2019, 11:56pm UTC](https://forum.dynamobim.com/t/revit-structural-framing-from-dynamo-lines/37872/1 "2019-07-02T23:56:05Z")

</div>

Hello,

I am new to both Revit and Dyanmo. I was able to create the geometry that I want in Dynamo and now I have to transfer it to Revit. I used the component StructuralFraming.BeamByCurve. It works pretty decently but the beam sections are rather assigned using the Dynamo lines as a top limit instead of the center line. I would like the beams to show up using the Dynamo lines as center lines. The Revit model ends up with all kinds of offsets and isn’t useful otherwise.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/a/8aac5830acb74faf10fe20a861b45a2b54053078.png)

Thank you,

---

<div class="post-metadata">

**Author:** ![salvatoredragotta](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/salvatoredragotta/32/10078_2.png) [@salvatoredragotta](https://forum.dynamobim.com/u/salvatoredragotta)\
**Post date:** [July 3, 2019, 1:05am UTC](https://forum.dynamobim.com/t/revit-structural-framing-from-dynamo-lines/37872/2 "2019-07-03T01:05:14Z")

</div>

@kmsaaf Try this:

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/c/bcbc46e75a690b313ac3142010e71e5aacc7cca6.png)

---

<div class="post-metadata">

**Author:** ![kmsaaf](https://avatars.discourse-cdn.com/v4/letter/k/82dd89/32.png) [@kmsaaf](https://forum.dynamobim.com/u/kmsaaf)\
**Post date:** [July 3, 2019, 2:17pm UTC](https://forum.dynamobim.com/t/revit-structural-framing-from-dynamo-lines/37872/3 "2019-07-03T14:17:54Z")

</div>

Thank you! This helped solve the issue. Setting all the elements z Justification to Center fixed the issue.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/0/301b98f46f8b4a8872a0ac9b56964082e4d7846e.png)