# Revit Pipe Sizer

**URL:** <https://forum.dynamobim.com/t/revit-pipe-sizer/78066>\
**Category:** Revit\
**Created:** [June 27, 2022, 11:01am UTC](https://forum.dynamobim.com/t/revit-pipe-sizer/78066 "2022-06-27T11:01:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CHANDU](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/chandu/32/169017_2.png) [@CHANDU](https://forum.dynamobim.com/u/CHANDU)\
**Post date:** [June 27, 2022, 11:01am UTC](https://forum.dynamobim.com/t/revit-pipe-sizer/78066/1 "2022-06-27T11:01:14Z")

</div>

Hi Everyone, My flow is correct in the Chilled water network but I am unable to resize the pipes by using the Revit default pipe sizer as per the flow. As you can see in the video the pipe sizes do not change after using the pipe sizer.Do I need to change any settings for this to happen? Please let me know.

[https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/1/c10d676bad38446d130074dcc42f173e9c6bf21e.mp4](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/1/c10d676bad38446d130074dcc42f173e9c6bf21e.mp4)

---

<div class="post-metadata">

**Author:** ![Tom\_Kunsman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/tom_kunsman/32/133796_2.png) [@Tom\_Kunsman](https://forum.dynamobim.com/u/Tom_Kunsman)\
**Post date:** [June 28, 2022, 11:26am UTC](https://forum.dynamobim.com/t/revit-pipe-sizer/78066/2 "2022-06-28T11:26:36Z")

</div>

You may want to post this question over on the Autodesk Revit forums, as this forum is for Dynamo. [Revit MEP Forum - Autodesk Community](https://forums.autodesk.com/t5/revit-mep-forum/bd-p/188)