# Resize scope box

**URL:** <https://forum.dynamobim.com/t/resize-scope-box/110278>\
**Category:** Revit\
**Created:** [May 21, 2025, 12:40pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278 "2025-05-21T12:40:02Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [May 21, 2025, 12:40pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/1 "2025-05-21T12:40:02Z")

</div>

I know you can’t create a new scope box… So I’m copying an existing one.  
I can move it to a new location.  
However, i’m stuck trying to work out a workaround for scaling it/ resizing it.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/d/1dcbf91bbfe6e80f5bcb79f5704e946923218759.png)

Point X is correct.  
Point B (in plan) should be where O is.

I saw his post : [How to set the height of a scopebox](https://forum.dynamobim.com/t/how-to-set-the-height-of-a-scopebox/2509)  
but that’s height, it’s the max x,y coordinate I’m having issues with, the z coordinate is fine.

[Create Scope Box from Section Box](https://forum.dynamobim.com/t/create-scope-box-from-section-box/95654) \<\< I didn’t understand how that applied to a scope box.

Is there a way to do this?

---

<div class="post-metadata">

**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\
**Post date:** [May 21, 2025, 1:11pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/2 "2025-05-21T13:11:26Z")

</div>

@Alien ,

i encountered similar issues. The point is when you run a dynamo script, it is a one way ticket. It stores the data from the first run. I recomment to open/close dynamo and run it again.

---

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [May 21, 2025, 1:16pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/3 "2025-05-21T13:16:43Z")

</div>

How do I alter the size of a scope box?

---

<div class="post-metadata">

**Author:** ![patrick\_podeyn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/patrick_podeyn/32/86368_2.png) [@patrick\_podeyn](https://forum.dynamobim.com/u/patrick_podeyn)\
**Post date:** [May 21, 2025, 2:34pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/4 "2025-05-21T14:34:46Z")

</div>

The one way I’ve “created” a scope box from “scratch” was by putting the scope box in a model group, placing the model group where I needed it to be, and then ungrouping the model group. When I was tasked with building it, there were three different bay sizes for a structural model and grid naming to determine what scope box size would be used.  
I asked Copilot if there’s a way to resize a scope box, and there really isn’t, but it said that you could position and scale a new scope box from the original using the element transform utils copy element method. It’s worth looking into, but it could be a dead end.

---

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [May 21, 2025, 2:38pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/5 "2025-05-21T14:38:36Z")

</div>

Currently I’ve copied an existing scope box.  
I’ve moved this to my start point (marked with ‘X’ on my awesome sketch 😃 )

Sadly though, I did try to scale and it didn’t work… I wondered if it was me and I should try harder or if I’m wasting my time.

I want to know if it is actually possible and which method I should look at.

---

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [May 21, 2025, 2:52pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/6 "2025-05-21T14:52:00Z")

</div>

@achintya_bhat don’t suppose adjusting scope boxes are in the, “add to API” in the near future?

---

<div class="post-metadata">

**Author:** ![Nick\_Boyts](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/nick_boyts/32/76313_2.png) [@Nick\_Boyts](https://forum.dynamobim.com/u/Nick_Boyts)\
**Post date:** [May 21, 2025, 3:27pm UTC](https://forum.dynamobim.com/t/resize-scope-box/110278/7 "2025-05-21T15:27:06Z")

</div>

I believe there’s no method for creating or modifying scope boxes (unless it was a recent add to the API that I’ve missed). Whether it’s on the API “roadmap” or not would be a question for the Revit team.
