# Renumber doors based on their "to room" parameter - List Logic

**URL:** <https://forum.dynamobim.com/t/renumber-doors-based-on-their-to-room-parameter-list-logic/88134>\
**Category:** Revit\
**Tags:** dynamo, list-filter\
**Created:** [April 3, 2023, 2:00pm UTC](https://forum.dynamobim.com/t/renumber-doors-based-on-their-to-room-parameter-list-logic/88134 "2023-04-03T14:00:30Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![b.ross](https://avatars.discourse-cdn.com/v4/letter/b/50afbb/32.png) [@b.ross](https://forum.dynamobim.com/u/b.ross)\
**Post date:** [April 3, 2023, 3:23pm UTC](https://forum.dynamobim.com/t/renumber-doors-based-on-their-to-room-parameter-list-logic/88134/5 "2023-04-03T15:23:35Z")

</div>

Thanks Jacob. the below from @Mostafa_El_Ayoubi seems to arrange the graph in a much better way than me & it seems to work

> [@Renumbering the door as room number](https://forum.dynamobim.com/t/renumbering-the-door-as-room-number/6540/10):
>
> Hi man , if i have 3 doors swing inside the same room (e.g room number is L1-015, so the doors will have the same room number “L-015”) but they should have L1-015-01, L1-015-02, L1-015-03 how i can do it

![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/3/73b812f49d85e3dae387380a63f4dccd5ab69009.jpeg)

---

_[View the full topic](https://forum.dynamobim.com/t/renumber-doors-based-on-their-to-room-parameter-list-logic/88134)._