# Reload Pick Model Elements **URL:** \ **Category:** Revit\ **Created:** [July 13, 2020, 9:34am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897 "2020-07-13T09:34:58Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![quattro23](https://avatars.discourse-cdn.com/v4/letter/q/6de8d8/32.png) [@quattro23](https://forum.dynamobim.com/u/quattro23)\ **Post date:** [July 13, 2020, 9:34am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/1 "2020-07-13T09:34:58Z")
So my script make floors from rooms, i can set the floor type, level and height above level… by picking the rooms, that works great. BUT, i have to close the dynamo file and reopen it to use it again with other rooms, because i can’t make a new selection… tried boolean, but that delets the floor from before…so not an option or i used it wrong… anyone has a solution for that? 😃 ![Dyn-FB01](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/6/e6bfa035fef6ad3fe57a084c6fb5fece89ccf8bf.jpeg) ---
**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\ **Post date:** [July 13, 2020, 9:36am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/2 "2020-07-13T09:36:49Z")
> [@quattro23](#): > > that delets the floor from before This is element binding. Clear your bindings and try using Dynamo Player to circumvent the issue. ---
**Author:** ![quattro23](https://avatars.discourse-cdn.com/v4/letter/q/6de8d8/32.png) [@quattro23](https://forum.dynamobim.com/u/quattro23)\ **Post date:** [July 13, 2020, 10:03am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/3 "2020-07-13T10:03:55Z")
So that means there is no better solution other then reopen the dynamo file 😃 Read about element binding and this obviously sucks. Dynamo Player is not an option for me, because i want to be able to change the settings and dont want to have dozens of dynamo files for that… There is really no way to unbind all after the execution of the graph? ---
**Author:** ![jshial](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jshial/32/91559_2.png) [@jshial](https://forum.dynamobim.com/u/jshial)\ **Post date:** [July 13, 2020, 10:28am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/5 "2020-07-13T10:28:35Z")
@quattro23 Dynamo Player is capable of changing settings. What kind of changes you want? The following thread contains 2 things that could be helpful also: 1. More info on [Element Binding](https://forum.dynamobim.com/t/element-binding-in-revit/31612). AU class by @jacob.small 2. Grant Revit the ownership of elements. > [@Structural Framing output gets replaced with every run](https://forum.dynamobim.com/t/structural-framing-output-gets-replaced-with-every-run/51662): > > Hi, I’ve created a simple Dynamo script that creates curved parametric trusses between two columns. The idea is that the user can select columns at various areas to create the trusses over consecutive columns or entirely different sections. The problem is that every time I run the Dynamo script (from player or platform), the output from the previous run is replaced and I can only ever create one truss using the one script. Is there a way to lock the outputs of each run into Revit so I can cre… ---
**Author:** ![quattro23](https://avatars.discourse-cdn.com/v4/letter/q/6de8d8/32.png) [@quattro23](https://forum.dynamobim.com/u/quattro23)\ **Post date:** [July 13, 2020, 11:13am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/6 "2020-07-13T11:13:28Z")
Well my dynamo player says that there are no settings to change, but i obviously can change them in the graph…were is the fault there? ---
**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\ **Post date:** [July 13, 2020, 11:28am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/7 "2020-07-13T11:28:44Z")
Set the parts which need to change to have ‘is input’ status. ---
**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\ **Post date:** [July 13, 2020, 1:57pm UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/8 "2020-07-13T13:57:08Z")
> [@quattro23](#): > > So that means there is no better solution other then reopen the dynamo file There is, if you create the floors for all rooms at once. You can create a list of selected rooms (by selecting multiple elements or other methods of short listing based on outlined criteria) As shown in the graph below, you could prepare a list of rooms, levels and floor types and create them at once. ![RoomFloor_2020-07-13_07-22-07](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/7/1727ac36c336a43f1614e03c212d3b6dc185cb8c.png) [RoomFloor.dyn](https://forum.dynamobim.com/uploads/short-url/i6Dq1hgJv57NDTlOzicchNQ3TRb.dyn) (38.3 KB) Hope this works for you. ---
**Author:** ![quattro23](https://avatars.discourse-cdn.com/v4/letter/q/6de8d8/32.png) [@quattro23](https://forum.dynamobim.com/u/quattro23)\ **Post date:** [July 14, 2020, 6:11am UTC](https://forum.dynamobim.com/t/reload-pick-model-elements/52897/9 "2020-07-14T06:11:26Z")
> [@Vikram\_Subbaiah](#): > > Hope this works for you. Also a good approach, but that was exactly what i didn’t want 😃 Had this in some way before, but that “workflow” wasn accapted by my boss. @jacob.small the tip with as input and the use of dynamo player is the way for us, thank you!