# Reference line from Revit

**URL:** <https://forum.dynamobim.com/t/reference-line-from-revit/2657>\
**Category:** FAQ\
**Tags:** revit\
**Created:** [December 7, 2015, 11:12am UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657 "2015-12-07T11:12:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![carlosdelab](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@carlosdelab](https://forum.dynamobim.com/u/carlosdelab)\
**Post date:** [December 7, 2015, 11:12am UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657/1 "2015-12-07T11:12:24Z")

</div>

Hi, I’m quite new in Dynamo.

I need to reference 5 specific curves from revit model.

which nodes should I use?

thanks in advance

Carlos

---

<div class="post-metadata">

**Author:** ![Konrad\_K\_Sobon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/konrad_k_sobon/32/8838_2.png) [@Konrad\_K\_Sobon](https://forum.dynamobim.com/u/Konrad_K_Sobon)\
**Post date:** [December 7, 2015, 11:27am UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657/2 "2015-12-07T11:27:39Z")

</div>

Select Model Elements.

---

<div class="post-metadata">

**Author:** ![carlosdelab](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@carlosdelab](https://forum.dynamobim.com/u/carlosdelab)\
**Post date:** [December 7, 2015, 11:50am UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657/3 "2015-12-07T11:50:02Z")

</div>

Hi Konrad,

thanks.

Ok got it, the selection only works from windows selection,

I can’t pick one by one curve till I have the curves I need?

this is how its work?

best

C,

&nbsp;

---

<div class="post-metadata">

**Author:** ![Konrad\_K\_Sobon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/konrad_k_sobon/32/8838_2.png) [@Konrad\_K\_Sobon](https://forum.dynamobim.com/u/Konrad_K_Sobon)\
**Post date:** [December 7, 2015, 12:26pm UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657/4 "2015-12-07T12:26:53Z")

</div>

Yeah, box selection only.

---

<div class="post-metadata">

**Author:** ![patrick\_podeyn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/patrick_podeyn/32/86368_2.png) [@patrick\_podeyn](https://forum.dynamobim.com/u/patrick_podeyn)\
**Post date:** [December 7, 2015, 3:10pm UTC](https://forum.dynamobim.com/t/reference-line-from-revit/2657/5 "2015-12-07T15:10:10Z")

</div>

You could select the lines you need then use the “Isolate Elements” command inside of Revit then window the lines you need.