# Read code of existing nodes in dynamo

**URL:** <https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190>\
**Category:** Uncategorized\
**Created:** [August 7, 2019, 9:24am UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190 "2019-08-07T09:24:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![swiftwing](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@swiftwing](https://forum.dynamobim.com/u/swiftwing)\
**Post date:** [August 7, 2019, 9:24am UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/1 "2019-08-07T09:24:30Z")

</div>

Greetings

I am new to dynamo and i was wondering is it possible to see code for existing nodes in dynamo, for example:  
ByPointsFaceIndices node under geometry\>mesh inside dynamo.

Thank you

---

<div class="post-metadata">

**Author:** ![Brendan\_Cassidy](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/brendan_cassidy/32/7685_2.png) [@Brendan\_Cassidy](https://forum.dynamobim.com/u/Brendan_Cassidy)\
**Post date:** [August 7, 2019, 9:55am UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/2 "2019-08-07T09:55:31Z")

</div>

Any part of dynamo that is open sourcd and the nodes are out of the box then the source could can be found on dynamos github page([https://github.com/DynamoDS/Dynamo](https://github.com/DynamoDS/Dynamo)).

There is also a dynamorevit page here([https://github.com/DynamoDS/DynamoRevit](https://github.com/DynamoDS/DynamoRevit)), for anything related to dynamo for revit.

Note: some geometric libraries are not open sourced!

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [August 7, 2019, 10:03am UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/3 "2019-08-07T10:03:41Z")

</div>

> [@Polycurve.ByJoinedCurves](https://forum.dynamobim.com/t/polycurve-byjoinedcurves/39118/4):
>
> The geometry library is not open source.

---

<div class="post-metadata">

**Author:** ![swiftwing](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@swiftwing](https://forum.dynamobim.com/u/swiftwing)\
**Post date:** [August 7, 2019, 12:59pm UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/4 "2019-08-07T12:59:17Z")

</div>

Thank you very much for feedback

---

<div class="post-metadata">

**Author:** ![tpitera](https://avatars.discourse-cdn.com/v4/letter/t/d2c977/32.png) [@tpitera](https://forum.dynamobim.com/u/tpitera)\
**Post date:** [September 9, 2020, 5:11pm UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/5 "2020-09-09T17:11:54Z")

</div>

@Brendan_Cassidy I am trying to read code of existing dynamo library nodes, specifically the BlockReference.ByCoordinateSystem node, but still cant find it based on your suggestion. is there a certain file in the github I should reference?

---

<div class="post-metadata">

**Author:** ![Brendan\_Cassidy](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/brendan_cassidy/32/7685_2.png) [@Brendan\_Cassidy](https://forum.dynamobim.com/u/Brendan_Cassidy)\
**Post date:** [September 9, 2020, 5:42pm UTC](https://forum.dynamobim.com/t/read-code-of-existing-nodes-in-dynamo/39190/6 "2020-09-09T17:42:17Z")

</div>

If this is a Civils 3d Node i do not think this has been released for people to see, therefore you wont be able to see the code for this.
