# Possible to edit electrical circuit parameters?

**URL:** <https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341>\
**Category:** Revit\
**Tags:** revit, dynamo\
**Created:** [October 15, 2021, 3:24pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341 "2021-10-15T15:24:06Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![wsayle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/wsayle/32/125475_2.png) [@wsayle](https://forum.dynamobim.com/u/wsayle)\
**Post date:** [October 15, 2021, 3:24pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/1 "2021-10-15T15:24:06Z")

</div>

I’m trying to use dynamo to edit the “Load Name” electrical circuit parameter. The intent is to put that on a panel schedule. When I run the Element.Parameters it does not show that parameter in the list.

When I run the rhythm elements.getparametervaluebynametypeorinstance (nice name haha) it does not return any values.

Any way to be able to use dynamo to edit these parameters??  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/1/714fcb9407957b794380bb8c644083d675658eb7.png)

---

<div class="post-metadata">

**Author:** ![Daan](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daan/32/82246_2.png) [@Daan](https://forum.dynamobim.com/u/Daan)\
**Post date:** [October 15, 2021, 3:52pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/2 "2021-10-15T15:52:42Z")

</div>

Hi @wsayle,

If this is a family type make sure to feed in the Family Type and not the Family Instance (or vice versa).

---

<div class="post-metadata">

**Author:** ![honeyjain619](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/honeyjain619/32/121215_2.png) [@honeyjain619](https://forum.dynamobim.com/u/honeyjain619)\
**Post date:** [October 16, 2021, 4:46am UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/3 "2021-10-16T04:46:56Z")

</div>

Hello @wsayle ,

In dynamo it suppose to give to value from get parameter / set parameter value by name. I think, you are facing some other problem.  
Can you please share a sample Revit & .dyn file, which will represent this type of issue.

---

<div class="post-metadata">

**Author:** ![wsayle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/wsayle/32/125475_2.png) [@wsayle](https://forum.dynamobim.com/u/wsayle)\
**Post date:** [October 18, 2021, 1:30pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/4 "2021-10-18T13:30:16Z")

</div>

Processing: TestProject.rvt…

Processing: Circuit Load ID.dyn…

---

<div class="post-metadata">

**Author:** ![wsayle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/wsayle/32/125475_2.png) [@wsayle](https://forum.dynamobim.com/u/wsayle)\
**Post date:** [October 18, 2021, 1:30pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/5 "2021-10-18T13:30:59Z")

</div>

It would appear that I can’t upload the files. This forum does not allow me too as I am a new user.

---

<div class="post-metadata">

**Author:** ![wsayle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/wsayle/32/125475_2.png) [@wsayle](https://forum.dynamobim.com/u/wsayle)\
**Post date:** [October 18, 2021, 1:46pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/6 "2021-10-18T13:46:18Z")

</div>

Here is a dropbox. Sorry, noob to the forum.

> **[Dynamo Help](https://www.dropbox.com/sh/17pxsliipike39f/AAD2uULtqFVr8PiicULjCt8da?dl=0)**
>
> Shared with Dropbox

---

<div class="post-metadata">

**Author:** ![c.poupin](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/c.poupin/32/89152_2.png) [@c.poupin](https://forum.dynamobim.com/u/c.poupin)\
**Post date:** [October 19, 2021, 2:19pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/7 "2021-10-19T14:19:08Z")

</div>

Hello,  
you need to choose ‘Electrical Circuit’ as Category

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/6/a67d38bc521a06b8417e35fd1e4198d43541223d.png)

Another solution is place ‘Element.ElectricalCircuit’ node after ‘All Element of Category’ OOTB node

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/c/9c14189c5df5f873eafff7c6009c9223fc001d8c.png)

---

<div class="post-metadata">

**Author:** ![wsayle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/wsayle/32/125475_2.png) [@wsayle](https://forum.dynamobim.com/u/wsayle)\
**Post date:** [October 20, 2021, 1:24pm UTC](https://forum.dynamobim.com/t/possible-to-edit-electrical-circuit-parameters/69341/8 "2021-10-20T13:24:49Z")

</div>

That works! Thank you!
