# Polyline from CAD

**URL:** <https://forum.dynamobim.com/t/polyline-from-cad/27875>\
**Category:** Packages\
**Created:** [October 31, 2018, 6:10am UTC](https://forum.dynamobim.com/t/polyline-from-cad/27875 "2018-10-31T06:10:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kennyb6](https://avatars.discourse-cdn.com/v4/letter/k/7ba0ec/32.png) [@kennyb6](https://forum.dynamobim.com/u/kennyb6)\
**Post date:** [October 31, 2018, 6:10am UTC](https://forum.dynamobim.com/t/polyline-from-cad/27875/1 "2018-10-31T06:10:52Z")

</div>

Is it possible to get polylines from CAD, similar to Bimorph’s CAD.CurvesFromCADLayers? That node breaks up all polylines to their respective lines and curves. For my current project, polylines cross each other or meet up at the same point, yet are supposed to be two separate entities, so any group by connection or distance isn’t working.

For more info, the polylines are all on the same layer, so separating that way would be a large task that would create more problems down the line.

---

<div class="post-metadata">

**Author:** ![atharva.purohit466SX](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/atharva.purohit466sx/32/116951_2.png) [@atharva.purohit466SX](https://forum.dynamobim.com/u/atharva.purohit466SX)\
**Post date:** [October 26, 2021, 6:15am UTC](https://forum.dynamobim.com/t/polyline-from-cad/27875/2 "2021-10-26T06:15:58Z")

</div>

I too am facing similar issue.  
Did you get the resolution yet? (seems your question got overlooked here.)

Regards,  
Atharva Purohit
