# PolyCurve.Fillet fails

**URL:** <https://forum.dynamobim.com/t/polycurve-fillet-fails/113697>\
**Category:** Uncategorized\
**Tags:** revit\
**Created:** [January 18, 2026, 6:22am UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697 "2026-01-18T06:22:04Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![accalexo.ff111](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@accalexo.ff111](https://forum.dynamobim.com/u/accalexo.ff111)\
**Post date:** [January 18, 2026, 6:22am UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697/1 "2026-01-18T06:22:04Z")

</div>

i’am trying to fillet a geomatry curve but sometimes it fails. anyidea why?

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/e/de07ae94f56187259629641e5b57fb5693126e76.png)

---

<div class="post-metadata">

**Author:** ![accalexo.ff111](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@accalexo.ff111](https://forum.dynamobim.com/u/accalexo.ff111)\
**Post date:** [January 18, 2026, 6:22am UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697/2 "2026-01-18T06:22:37Z")

</div>

thats the curve

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/7/f7d660a61fc92189fa2bc166a74843d5c5f4b4a9.png)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [January 18, 2026, 8:16am UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697/3 "2026-01-18T08:16:17Z")

</div>

Hello @accalexo.ff111 and welcome 😉 try ꟿ PolyCurve.Fillet+ from spring and see if it could be better 😉

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [January 18, 2026, 11:50am UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697/4 "2026-01-18T11:50:17Z")

</div>

Likely after the first fillet is added there isn’t a valid way to do the fillet. Try swapping the clockwise sequence, or using a smaller radius and see if that works.

---

<div class="post-metadata">

**Author:** ![jwroelofs](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jwroelofs/32/55712_2.png) [@jwroelofs](https://forum.dynamobim.com/u/jwroelofs)\
**Post date:** [January 18, 2026, 2:33pm UTC](https://forum.dynamobim.com/t/polycurve-fillet-fails/113697/5 "2026-01-18T14:33:10Z")

</div>

Try 50 instat of -50
