# Place family along curve **URL:** \ **Category:** Packages\ **Created:** [February 25, 2016, 4:58am UTC](https://forum.dynamobim.com/t/place-family-along-curve/3259 "2016-02-25T04:58:38Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Benjamin\_Flataker](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@Benjamin\_Flataker](https://forum.dynamobim.com/u/Benjamin_Flataker)\ **Post date:** [February 25, 2016, 4:58am UTC](https://forum.dynamobim.com/t/place-family-along-curve/3259/1 "2016-02-25T04:58:38Z")
          I’m having problem fitting my adaptive family along a curve, my problem is to get the Generic Model to be placed in revit, like it is fitting i Dynamo. The model is showing up in refit, but its not a Generic Model. Is it possible to make the adaptive point, adjusting to any given coordinate-system? ![DYNAMO VIEW](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/a/a787e1ce7b435d629f19645503b47b5a3f9729c6.png) ![REVIT VIEW](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/7/7a3de63b7803e315a76db5e888ee884674cb57ec.png)                     ---
**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\ **Post date:** [February 25, 2016, 7:17am UTC](https://forum.dynamobim.com/t/place-family-along-curve/3259/2 "2016-02-25T07:17:22Z")
If it is an adaptive component, I would make it a 2 point AC and specify the two points using Dynamo. Instead of a one point AC, something like this using a generic model family might work… ![20160225-2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/c/cbad7b36083cdc28572e1d65fb13795f6bd6291d.png)   ---
**Author:** ![Merlo](https://avatars.discourse-cdn.com/v4/letter/m/d26b3c/32.png) [@Merlo](https://forum.dynamobim.com/u/Merlo)\ **Post date:** [January 26, 2018, 1:48am UTC](https://forum.dynamobim.com/t/place-family-along-curve/3259/3 "2018-01-26T01:48:36Z")
Hi, I’m sorry to return to this problem again. But I have tried to do the same and I have found some surprises. Some of my families do not respond to the correct address. What is this about? It is a simple Revit model, a bank. On the other hand, what is that of turning it into “CA”? ![Bancos%201](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/3/139f98d2d30868a7ade8032b8893d01ca76e4de4.jpg) ![Bancos](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/1/11a5d6f39c8063d3ac8c19d5e90001a95b5e35cc.png) I also found some doubts that I do not understand. Why if I use a “Slider” in a Code Block does not work? As also an Element.Curves in must of “CurveElements.Curve”. What difference there are? ![Bancos%202](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/5/357aea4a892bc72fec30f08e08c546513f51b7ee.jpg) ![Bancos%203](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/c/9c39b374bf52c6f9b11c4ae1ca15f314e767bde5.jpg) ![Bancos%204](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/9/e96a039d8daa036ad9ef626843b97f395a4a8b5c.jpg) I appreciate your help. Goodnight. ---
**Author:** ![Thom\_Krejci](https://avatars.discourse-cdn.com/v4/letter/t/977dab/32.png) [@Thom\_Krejci](https://forum.dynamobim.com/u/Thom_Krejci)\ **Post date:** [June 22, 2022, 7:03pm UTC](https://forum.dynamobim.com/t/place-family-along-curve/3259/4 "2022-06-22T19:03:18Z")
Thanks for the help in what I was trying to do. I modified the above and this [Referring Post](https://forum.dynamobim.com/t/curve-divide-equally/7949/3) for a simple script to place a family at equal distances along a curve/spline. ![Equal Distance](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/5/f543d74c92a377529305ba27ae8f37e296dc6aac.png)