# Overhang to roof **URL:** \ **Category:** DesignScript\ **Created:** [November 21, 2018, 8:21am UTC](https://forum.dynamobim.com/t/overhang-to-roof/28738 "2018-11-21T08:21:28Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\ **Post date:** [November 21, 2018, 9:16am UTC](https://forum.dynamobim.com/t/overhang-to-roof/28738/4 "2018-11-21T09:16:24Z")
@shershahbacha9 Here are your posts that you didn’t mark them as solved: > [@Flat roof instead of slopy](https://forum.dynamobim.com/t/flat-roof-instead-of-slopy/28692): > > hello i placed roof on walls in dynamo but the roof comes flat instead of slopy , need your help please > [@Walls curve not extracted in dynamo](https://forum.dynamobim.com/t/walls-curve-not-extracted-in-dynamo/28693): > > [3] [4] Hello i have walls in revit and i want to place roof on these walls in revit by dynamo , so i think i should extract curve of walls as seen in Question Answers somewhere on this platform . but when i follow the same nodes like select modal elements and element.curve , the list is empty > [@Revit , creating points on stair tread end to insert wood bars in between them](https://forum.dynamobim.com/t/revit-creating-points-on-stair-tread-end-to-insert-wood-bars-in-between-them/28523): > > hello i have a problem in revit to create points on every stair tread end to insert adaptive family wood bar in between two treads as seen in the picture [stair3] [stair2] > [@Script mistake](https://forum.dynamobim.com/t/script-mistake/28077): > > what wrong in my script as i am trying to put windows in wall… why comes this gap between floor and walls --- _[View the full topic](https://forum.dynamobim.com/t/overhang-to-roof/28738)._