# Orientate Multiple 3D views to a single Floor Plan view

**URL:** <https://forum.dynamobim.com/t/orientate-multiple-3d-views-to-a-single-floor-plan-view/15774>\
**Category:** Revit\
**Tags:** revit, python, dynamo\
**Created:** [October 19, 2017, 8:21pm UTC](https://forum.dynamobim.com/t/orientate-multiple-3d-views-to-a-single-floor-plan-view/15774 "2017-10-19T20:21:13Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![awilliams](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/awilliams/32/114496_2.png) [@awilliams](https://forum.dynamobim.com/u/awilliams)\
**Post date:** [October 23, 2017, 4:19pm UTC](https://forum.dynamobim.com/t/orientate-multiple-3d-views-to-a-single-floor-plan-view/15774/8 "2017-10-23T16:19:40Z")

</div>

> [@jraiten](#):
>
> It’s supposed to crop down to only Level 01 like the X01\_SET view.

@jraiten it seems as though you are describing that you wish to modify the 3D views’ section boxes, not their orientations.

Have a look at this thread:

> [@Section Box in 3D view to match Levels](https://forum.dynamobim.com/t/section-box-in-3d-view-to-match-levels/7931/11):
>
> Getting ever closer to the finished product! I have created the same graph that John provided in post #2 to capture the bounding box and send it to a new view. The only thing that has not worked yet is after I input the Bounding Box to the create 3D node, it shows it in the 3D view, but it does not apply a Section Box to the newly created Bounding Box. I thought I have seen something (a node somewhere) that prompts for a Section Box or if a Section Box is applied to a view. Any thoughts? Part …

---

_[View the full topic](https://forum.dynamobim.com/t/orientate-multiple-3d-views-to-a-single-floor-plan-view/15774)._