# Offset and elevation reports for a Civil 3D corridor

**URL:** <https://forum.dynamobim.com/t/offset-and-elevation-reports-for-a-civil-3d-corridor/64468>\
**Category:** Civil 3D\
**Tags:** geometry, dynamo, civil3d\
**Created:** [May 28, 2021, 10:36am UTC](https://forum.dynamobim.com/t/offset-and-elevation-reports-for-a-civil-3d-corridor/64468 "2021-05-28T10:36:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [May 28, 2021, 2:57pm UTC](https://forum.dynamobim.com/t/offset-and-elevation-reports-for-a-civil-3d-corridor/64468/2 "2021-05-28T14:57:46Z")

</div>

Hi @praveen.kgnvUW3AG,

Here are some similar posts. Do any of them help?

> [@Points from Alignment projected on featurelines/offset alignments or polylines](https://forum.dynamobim.com/t/points-from-alignment-projected-on-featurelines-offset-alignments-or-polylines/56629):
>
> Hello, For roads and rails, taking alignment (Main Line) station and calculation of properties at parallel feature lines/Polyline or offset alignment at that stations are basic operation. I have seen lot questions asked along the same line on this forum too. This is an attempt to collect different methods to perform this operations. One of the method discussed as solutions is to create station origin points at mainline and create ZY plane at these stations and use the geometry.intersect to fin…

> [@Distance of offset alignment](https://forum.dynamobim.com/t/distance-of-offset-alignment/56522):
>
> Is it possible to get the distance from main alignment to the offset alignment at station xx?

---

_[View the full topic](https://forum.dynamobim.com/t/offset-and-elevation-reports-for-a-civil-3d-corridor/64468)._