# NurbsCurve and Curve.PointAtParameter

**URL:** <https://forum.dynamobim.com/t/nurbscurve-and-curve-pointatparameter/37511>\
**Category:** Lists-Logic\
**Tags:** dynamo\
**Created:** [June 24, 2019, 2:48am UTC](https://forum.dynamobim.com/t/nurbscurve-and-curve-pointatparameter/37511 "2019-06-24T02:48:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwy997](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jwy997](https://forum.dynamobim.com/u/jwy997)\
**Post date:** [June 24, 2019, 2:48am UTC](https://forum.dynamobim.com/t/nurbscurve-and-curve-pointatparameter/37511/1 "2019-06-24T02:48:18Z")

</div>

Good Day,

I am trying to divide a curve like how u will perform in revit where u divide a path. Please advise on my script below. I am curious why curve.pointatparameter only gives me a starting point, where are the remaining?

 ![error](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/f/af009c7a29b9f61496a6c13c73e5eccc8076050e.png)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [June 24, 2019, 3:14am UTC](https://forum.dynamobim.com/t/nurbscurve-and-curve-pointatparameter/37511/2 "2019-06-24T03:14:38Z")

</div>

This is a lacing issue. Set lacing to longest and you should get the result you are after.

Best to review the Dynamo Primer, specifically the sections on lists and lacing, as it will help you manage this stuff more easily.

> **[About | The Dynamo Primer](https://primer.dynamobim.org/)**
>
> Download the Dynamo v1.3 Primer here