# Node for insulation

**URL:** <https://forum.dynamobim.com/t/node-for-insulation/34247>\
**Category:** Uncategorized\
**Created:** [April 1, 2019, 3:53pm UTC](https://forum.dynamobim.com/t/node-for-insulation/34247 "2019-04-01T15:53:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![SHIBUJOSE](https://avatars.discourse-cdn.com/v4/letter/s/c77e96/32.png) [@SHIBUJOSE](https://forum.dynamobim.com/u/SHIBUJOSE)\
**Post date:** [April 1, 2019, 3:53pm UTC](https://forum.dynamobim.com/t/node-for-insulation/34247/1 "2019-04-01T15:53:20Z")

</div>

Is there any node to know whether the duct is insulated or not

---

<div class="post-metadata">

**Author:** ![lsmm](https://avatars.discourse-cdn.com/v4/letter/l/4bbf92/32.png) [@lsmm](https://forum.dynamobim.com/u/lsmm)\
**Post date:** [April 1, 2019, 7:23pm UTC](https://forum.dynamobim.com/t/node-for-insulation/34247/2 "2019-04-01T19:23:42Z")

</div>

I think you should be able to use the MEPover package for this 🙂  
It has a node to get the insulation of ducts and pipes.

---

<div class="post-metadata">

**Author:** ![Nick\_Boyts](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/nick_boyts/32/76313_2.png) [@Nick\_Boyts](https://forum.dynamobim.com/u/Nick_Boyts)\
**Post date:** [April 1, 2019, 7:59pm UTC](https://forum.dynamobim.com/t/node-for-insulation/34247/3 "2019-04-01T19:59:48Z")

</div>

You can just use GetParameterValueByName to check the related parameters.