# Moving adaptive points with Dynamo

**URL:** <https://forum.dynamobim.com/t/moving-adaptive-points-with-dynamo/37938>\
**Category:** Revit\
**Created:** [July 4, 2019, 6:49am UTC](https://forum.dynamobim.com/t/moving-adaptive-points-with-dynamo/37938 "2019-07-04T06:49:33Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![viktor\_kuzev](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/viktor_kuzev/32/48254_2.png) [@viktor\_kuzev](https://forum.dynamobim.com/u/viktor_kuzev)\
**Post date:** [July 4, 2019, 10:22am UTC](https://forum.dynamobim.com/t/moving-adaptive-points-with-dynamo/37938/5 "2019-07-04T10:22:27Z")

</div>

Something to get you started:  
refer to this post to find which adaptive points belong to which family:

> [@Listing Adaptive Component Placement point Locations](https://forum.dynamobim.com/t/listing-adaptive-component-placement-point-locations/3980):
>
> I have a 4 point adaptive component that is applied to a divided surface, I was just wondering if there was a way of identifying all of the individual panels and then listing all of the placement point in xyz coordinates for each component? I am able to list all of the adaptive components and there insertion point (which is the 1st placement point), I just need to get access to all of the placement points. As always, I would appreciate any help.

And this is a start for the actual moving. It is currently just moving one of the adaptive points:

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/a/9a9a8b1e7f2045bf945a948a95483daa281a6436.png)

I’m using a method from the RevitAPI to move the point.  
I don’t know if there’s a package that has implemented that method into a node.

---

_[View the full topic](https://forum.dynamobim.com/t/moving-adaptive-points-with-dynamo/37938)._