# MEPFitting.ByPointsAndCurve

**URL:** <https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [August 25, 2019, 10:34am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864 "2019-08-25T10:34:33Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![hazemelhady](https://avatars.discourse-cdn.com/v4/letter/h/d2c977/32.png) [@hazemelhady](https://forum.dynamobim.com/u/hazemelhady)\
**Post date:** [August 25, 2019, 10:34am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/1 "2019-08-25T10:34:33Z")

</div>

i’m trying to use this node to add duct damper on the duct but it did not split the duct and add the damper  
it just put the damper without connecting it

 ![1](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/5/8532b856303159ca06384da6792b28f5bbe1268a.png) ![2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/e/0eb64894823b42f50d29472c32cc6db7d32080ec.png)

---

<div class="post-metadata">

**Author:** ![hazemelhady](https://avatars.discourse-cdn.com/v4/letter/h/d2c977/32.png) [@hazemelhady](https://forum.dynamobim.com/u/hazemelhady)\
**Post date:** [August 25, 2019, 10:35am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/2 "2019-08-25T10:35:55Z")

</div>

@T_Pover

---

<div class="post-metadata">

**Author:** ![T\_Pover](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/t_pover/32/19147_2.png) [@T\_Pover](https://forum.dynamobim.com/u/T_Pover)\
**Post date:** [August 25, 2019, 11:17am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/3 "2019-08-25T11:17:03Z")

</div>

Could you show the output of the nodes that go into the MEPFitting. ByPointsAndCurve node?

---

<div class="post-metadata">

**Author:** ![hazemelhady](https://avatars.discourse-cdn.com/v4/letter/h/d2c977/32.png) [@hazemelhady](https://forum.dynamobim.com/u/hazemelhady)\
**Post date:** [August 25, 2019, 11:18am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/4 "2019-08-25T11:18:57Z")

</div>

![3](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/6/5631f5472a0239c9adbc29350c3b7a07b957efcf.png)

this is the out put

---

<div class="post-metadata">

**Author:** ![hazemelhady](https://avatars.discourse-cdn.com/v4/letter/h/d2c977/32.png) [@hazemelhady](https://forum.dynamobim.com/u/hazemelhady)\
**Post date:** [August 25, 2019, 11:19am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/5 "2019-08-25T11:19:40Z")

</div>

![4](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/f/8f352053662a4e29daf1f1c5cc3ff33c51ccfba7.png)

---

<div class="post-metadata">

**Author:** ![T\_Pover](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/t_pover/32/19147_2.png) [@T\_Pover](https://forum.dynamobim.com/u/T_Pover)\
**Post date:** [August 27, 2019, 7:47am UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/6 "2019-08-27T07:47:50Z")

</div>

I actually meant the results of the nodes that go into the MEPFitting node, so the inputs for the ListOfPoints and the MEPCurve  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/a/9ad7688b46f139fe8e802fa6095ab70f3231bff2.png)

---

<div class="post-metadata">

**Author:** ![hazemelhady](https://avatars.discourse-cdn.com/v4/letter/h/d2c977/32.png) [@hazemelhady](https://forum.dynamobim.com/u/hazemelhady)\
**Post date:** [September 11, 2019, 2:31pm UTC](https://forum.dynamobim.com/t/mepfitting-bypointsandcurve/39864/7 "2019-09-11T14:31:02Z")

</div>

thank you i solve it