# List sorting and combining // multiple sloped panels in radial grid

**URL:** <https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120>\
**Category:** Lists-Logic\
**Created:** [May 30, 2017, 10:52am UTC](https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120 "2017-05-30T10:52:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![btastam](https://avatars.discourse-cdn.com/v4/letter/b/bbce88/32.png) [@btastam](https://forum.dynamobim.com/u/btastam)\
**Post date:** [May 30, 2017, 10:52am UTC](https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120/1 "2017-05-30T10:52:25Z")

</div>

What I am trying to construct are muliple sloped panels between radial placed horizontal beams.

Somehow moving and rotating a list with points did not work out so I contstructed a radial pattern (elevations, segments) based on curves and ended up with 3 lists (startpoint, endpoint and intermediate points) but how to sort/reorder the lists to make closed 4-point polylines as shown in red on the screenshot ?

First of all the points on the curve should be merged in the right order then a loop to create the closed polycurves, but how?

In a later stage negative offset + extrusion are applied

![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/a/3a5b9ccbfe4b2a01397de5272e668772cd5349f2.jpg)  
[polycurve\_2017v020.dyn](https://forum.dynamobim.com/uploads/short-url/xQvw7nzxZlV5Za4a0CrDC2IqIpU.dyn) (39.3 KB)

---

<div class="post-metadata">

**Author:** ![jostein\_olsen](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jostein_olsen/32/8570_2.png) [@jostein\_olsen](https://forum.dynamobim.com/u/jostein_olsen)\
**Post date:** [May 30, 2017, 12:03pm UTC](https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120/2 "2017-05-30T12:03:27Z")

</div>

Maybe this?

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/0/607c1353214fed3091d13d6ac21555b1e8437bfe.png)

---

<div class="post-metadata">

**Author:** ![btastam](https://avatars.discourse-cdn.com/v4/letter/b/bbce88/32.png) [@btastam](https://forum.dynamobim.com/u/btastam)\
**Post date:** [May 30, 2017, 3:00pm UTC](https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120/3 "2017-05-30T15:00:12Z")

</div>

Thanks, that looks really good; I definatly need to learn some more ;  
And how to make a structural beam below/between the planes; I need to flipflop somehow the lists so I can attach a beam to it ?!

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [May 30, 2017, 3:33pm UTC](https://forum.dynamobim.com/t/list-sorting-and-combining-multiple-sloped-panels-in-radial-grid/12120/4 "2017-05-30T15:33:42Z")

</div>

> [@btastam](#):
>
> And how to make a structural beam below/between the planes; I need to flipflop somehow the lists so I can attach a beam to it ?!

Your original question was answered by @jostein_olsen you need to start new topic for your second query. Thanks!
