# Is there a way to get center line or center points of a corridor?

**URL:** <https://forum.dynamobim.com/t/is-there-a-way-to-get-center-line-or-center-points-of-a-corridor/24454>\
**Category:** Revit\
**Created:** [August 3, 2018, 3:08pm UTC](https://forum.dynamobim.com/t/is-there-a-way-to-get-center-line-or-center-points-of-a-corridor/24454 "2018-08-03T15:08:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![WARTELLAD](https://avatars.discourse-cdn.com/v4/letter/w/34f0e0/32.png) [@WARTELLAD](https://forum.dynamobim.com/u/WARTELLAD)\
**Post date:** [August 3, 2018, 3:08pm UTC](https://forum.dynamobim.com/t/is-there-a-way-to-get-center-line-or-center-points-of-a-corridor/24454/1 "2018-08-03T15:08:11Z")

</div>

![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/b/cb6a6bd0ec07461b6ee05a7f66e6ff73ef4672c5.png)

I would like to get the center line of a corridor as shown above, so I can place exit signs every x ft and so on. Any ideas?

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [August 3, 2018, 3:16pm UTC](https://forum.dynamobim.com/t/is-there-a-way-to-get-center-line-or-center-points-of-a-corridor/24454/2 "2018-08-03T15:16:08Z")

</div>

Hi @WARTELLAD

You will find solution here:

> [@How to find the center path of a surface](https://forum.dynamobim.com/t/how-to-find-the-center-path-of-a-surface/15791/2):
>
> Here’s a way (a bit rough) to get the result you asked for. Hope it can help you.