# Intersection Issue between a Polysurface and a Mesh: EDGECOIN\_PROBLEM

**URL:** <https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577>\
**Category:** Uncategorized\
**Created:** [March 24, 2017, 2:08pm UTC](https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577 "2017-03-24T14:08:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jackelly3](https://avatars.discourse-cdn.com/v4/letter/j/4af34b/32.png) [@jackelly3](https://forum.dynamobim.com/u/jackelly3)\
**Post date:** [March 24, 2017, 2:08pm UTC](https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577/1 "2017-03-24T14:08:03Z")

</div>

I have a mesh (input “geometry”) and a surface (input “other”) going into a Geometry.IntersectAll. It is giving me the error “EDGECOIN\_PROBLEM – system inconsistency processing edge coincidence.” I have run a Geometry.DoesIntersect node on the same inputs with a List.FilterByBoolMask and it gives me the right configuration without cutting the excess lines. I cannot find any information on the error to determine the issue.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/3/13460cc68e0a7b4fb8d6152ab834569e754f1ae7.JPG)

This runs a mask to find the intersecting geometry but doesn’t trim the lines as desired

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/b/2b65d915b2d7a6af06a8a465390fd47b9470a933.PNG)  
This is the input “geometry”, which is a mesh of lines.  
 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/b/3b55ef0b4f3779a4872dcbe2d34be7464b222e71.JPG)  
This is the input “other”, which is a polysurface  
 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/b/7ba947e9530212a4ac349376883543d4321e374d.JPG)

---

<div class="post-metadata">

**Author:** ![viktor\_kuzev](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/viktor_kuzev/32/48254_2.png) [@viktor\_kuzev](https://forum.dynamobim.com/u/viktor_kuzev)\
**Post date:** [March 27, 2017, 11:50am UTC](https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577/2 "2017-03-27T11:50:56Z")

</div>

Hi! Can you drop your files here?

---

<div class="post-metadata">

**Author:** ![ricardoperucci](https://avatars.discourse-cdn.com/v4/letter/r/ee7513/32.png) [@ricardoperucci](https://forum.dynamobim.com/u/ricardoperucci)\
**Post date:** [February 16, 2018, 6:36pm UTC](https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577/3 "2018-02-16T18:36:50Z")

</div>

Still no answers for that? I’ve got almost the same problem here

---

<div class="post-metadata">

**Author:** ![shawaomar75](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@shawaomar75](https://forum.dynamobim.com/u/shawaomar75)\
**Post date:** [August 24, 2021, 2:23pm UTC](https://forum.dynamobim.com/t/intersection-issue-between-a-polysurface-and-a-mesh-edgecoin-problem/10577/4 "2021-08-24T14:23:15Z")

</div>

![Solid.byUnion](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/c/bc9990d621601e54006a691c8f8c4edd1a383857.png)
