# Install 1.3.2 after installing 2019 **URL:** \ **Category:** Uncategorized\ **Created:** [March 19, 2019, 8:21pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724 "2019-03-19T20:21:18Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Steven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/steven/32/112504_2.png) [@Steven](https://forum.dynamobim.com/u/Steven)\ **Post date:** [March 19, 2019, 8:21pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/1 "2019-03-19T20:21:18Z")
Hello all, I need to run a script in 2016 Revit. I had dynamo 1.3.4 installed from Revit 2019 auto install. I have since uninstalled Dynamo 1.3.4 and 2.0.2 (deleted all found folders left after the install too) and Revit 2019. After all of the uninstalls I am still unable to install 1.3.2. “Dynamo Revit components will not be installed as there is already a newer version installed.” ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/5/d5f9605c10b6b02d758abeefa1b3a7152a28f776.png) I have read these post but they do not seem to help. In the first post, @des.hourihane was able to get it to install by deleting keys in the registry. I am not super familiar with the registry and well I think that says enough. Does anyone know what is blocking Dynamo 1.3.2 from installing? > [@Cannot install as Installer is finding 'newer versions'. I have uninstalled and cleaned every way I can - help!](https://forum.dynamobim.com/t/cannot-install-as-installer-is-finding-newer-versions-i-have-uninstalled-and-cleaned-every-way-i-can-help/25104): > > Hi Our practice has live projects in Revit 2016 and 2017. I have Dynamo scripts I run in v1.3.2 (latest release compatible with 2016). I recently re-installed Revit 2019. That seems to have installed Dynamo 1.3.3 and 2.0.1. I had this issue a while back and I was able to uninstall 1.3.3 to roll back to 1.3.2. At that time, I found the Autodesk Uninstall Tool didn’t fully remove it and nor did the standard ‘Uninstall Application’ in the Windows System Settings. After a little digging online I … > [@Revit 2019 Install - Dynamo gone from Revit 2016](https://forum.dynamobim.com/t/revit-2019-install-dynamo-gone-from-revit-2016/21046): > > When I installed Revit 2019, it automatically installed the latest version of Dynamo: 1.3.3. This version does not support Revit 2016 (so says your blog). I am 99% certain that the Revit 2019/Dynamo 1.3.3 install caused an older version of Dynamo to be removed from Revit 2016 on my computer - it would have been Dynamo 1.2. This is not acceptable behaviour, as most of the construction industry needs to maintain multiple versions of Revit (older projects under construction seldom get upgraded t… > [@Dynamo for Revit 2016](https://forum.dynamobim.com/t/dynamo-for-revit-2016/21123): > > Hi fellas! Quick question: How do I get Dynamo for Revit 2016? Need it for an older project but I can’t seem to get it working. Latest Dynamo involves 2017 - 2019. Dynamo 1.2 installs and should be including Dynamo for Revit 2016 but it never shows in Revit. ---
**Author:** ![Steven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/steven/32/112504_2.png) [@Steven](https://forum.dynamobim.com/u/Steven)\ **Post date:** [March 19, 2019, 9:07pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/2 "2019-03-19T21:07:29Z")
After 3 hours of searching, I found the below post from Autodesk. I have also now found and read the below GitHub post. I get the discussion and support the notion of only being able to support 3 years of software. However, if this is going to be the case the uninstall function should remove everything for the user. I am baffled as to why the solution is to have users manually delete files in the Registry. This is in no way supported by anyone regardless of how many legacy versions of a software are supported. > **[Unable to find Dynamo in Revit 2016 after installing Revit 2019 | Revit...](https://knowledge.autodesk.com/support/revit-products/troubleshooting/caas/sfdcarticles/sfdcarticles/Unable-to-find-Dynamo-in-Revit-2016-after-installing-Revit-2019.html)** > > After installing Revit 2019 you are not able to locate the Dynamo add-in in Revit 2016 anymore. With Revit 2019, Dynamo Core 1.3.3 was released. Dynamo 1.3.3 is only supported in Revit 2017, 2018, and 2019.  For more details on Dynamo and Revit... > ---
**Author:** ![Brendan\_Cassidy](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/brendan_cassidy/32/7685_2.png) [@Brendan\_Cassidy](https://forum.dynamobim.com/u/Brendan_Cassidy)\ **Post date:** [March 20, 2019, 9:51am UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/3 "2019-03-20T09:51:27Z")
Watch out if doing either of the solution above then decide to install the latest service pack for revit 2019, this is because the latest service pack also includes dynamo 1.3.4 within. So it may be best to get your revit fully updated then to do the solution above. ---
**Author:** ![Joe.Charpentier](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/joe.charpentier/32/49617_2.png) [@Joe.Charpentier](https://forum.dynamobim.com/u/Joe.Charpentier)\ **Post date:** [April 4, 2019, 2:50pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/4 "2019-04-04T14:50:49Z")
I just ran into this- I had gone through the “Install 2019-\>Get Dynamo 1.3.3-\>Uninstall Dynamo 1.3.3-\>Reinstall Dynamo 1.3.2” process, and then I Installed the 2019.2 update… and now I have to do it all again if I want to run dynamo on Revit 2016. (Which is a requirement, we still have projects in 2016.) I’m assuming that I’ll soon be repeating this process for Revit 2017 when Revit 2020 comes out. ---
**Author:** ![Steven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/steven/32/112504_2.png) [@Steven](https://forum.dynamobim.com/u/Steven)\ **Post date:** [April 4, 2019, 4:01pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/5 "2019-04-04T16:01:46Z")
This did work for me but you need to do the copy before you run the install. > [@Revit 2019 Install - Dynamo gone from Revit 2016](https://forum.dynamobim.com/t/revit-2019-install-dynamo-gone-from-revit-2016/21046/4): > > Thanks Kulkul, I reported the issue on GitHub - the developers said that it is ‘agreed practise’ to only support 3 versions. So dropping 2016 support was automatically done without any discussion. I think I upset them by complaining about this issue, but I see that other people are now complaining about this too. While Autodesk decide whether to do anything about this issue, I have found my own dodgy workaround. I found a post on GitHub where some service pack for Revit 2017 did the sa… ---
**Author:** ![Joe.Charpentier](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/joe.charpentier/32/49617_2.png) [@Joe.Charpentier](https://forum.dynamobim.com/u/Joe.Charpentier)\ **Post date:** [April 4, 2019, 4:32pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/6 "2019-04-04T16:32:09Z")
Steven- If you’re talking about the last post which describes updating the Revit 2019 install folders so that they install Dynamo 2 instead of 1.3.3: I have managed that for other users, and we are using that installer now. However, I don’t know of a way to unbundle an update/patch so I can substitute the files (In this case, the file is “Autodesk\_Revit\_2019\_2\_1.exe”). Joe ---
**Author:** ![Steven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/steven/32/112504_2.png) [@Steven](https://forum.dynamobim.com/u/Steven)\ **Post date:** [April 4, 2019, 8:46pm UTC](https://forum.dynamobim.com/t/install-1-3-2-after-installing-2019/33724/7 "2019-04-04T20:46:03Z")
No post number 4 (Tim’s second post) about copying and pasting the old dynamo folder. It was easy and worked well. If you have another computer with it installed just snag the files Tim listed.