# Inconsistency between the Revit model and the Dynamo coordinates

**URL:** <https://forum.dynamobim.com/t/inconsistency-between-the-revit-model-and-the-dynamo-coordinates/20780>\
**Category:** Geometry\
**Tags:** dynamo\
**Created:** [April 6, 2018, 6:37am UTC](https://forum.dynamobim.com/t/inconsistency-between-the-revit-model-and-the-dynamo-coordinates/20780 "2018-04-06T06:37:00Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Andrew\_Hannell](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andrew_hannell/32/103315_2.png) [@Andrew\_Hannell](https://forum.dynamobim.com/u/Andrew_Hannell)\
**Post date:** [April 6, 2018, 7:21am UTC](https://forum.dynamobim.com/t/inconsistency-between-the-revit-model-and-the-dynamo-coordinates/20780/3 "2018-04-06T07:21:21Z")

</div>

there are a number of posts on this forum about converting internal (Dynamo) coordinates into shared coordinates.

The important thing to remember is that shared coordinates are really just a translation applied to the entire model. It is a bit easier since you just have a N/S translation, not a rotation as welll

Try this:

> [@Element Shared Coordinates Location](https://forum.dynamobim.com/t/element-shared-coordinates-location/5798):
>
> Hey All Im trying to fetch the Shared coordinates location of my piles and write them into some custom parameters i made. Normally the Element.Location type nodes do the trick, but they dont seem to be in this case. I have a Structural project which is set up using Shared Coordinates (Survey point is at 0,0 and Base point is in a set location). When i use the normal methods of retrieving the elements location i am getting the coordinates from the base point, i do not want this, i want the coo…

---

_[View the full topic](https://forum.dynamobim.com/t/inconsistency-between-the-revit-model-and-the-dynamo-coordinates/20780)._
