# How to pick wall,ceiling and floor finishes and feed them into the Room Schedule

**URL:** <https://forum.dynamobim.com/t/how-to-pick-wall-ceiling-and-floor-finishes-and-feed-them-into-the-room-schedule/11579>\
**Category:** Uncategorized\
**Created:** [May 7, 2017, 7:29am UTC](https://forum.dynamobim.com/t/how-to-pick-wall-ceiling-and-floor-finishes-and-feed-them-into-the-room-schedule/11579 "2017-05-07T07:29:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bony.george](https://avatars.discourse-cdn.com/v4/letter/b/e19adc/32.png) [@bony.george](https://forum.dynamobim.com/u/bony.george)\
**Post date:** [May 7, 2017, 7:29am UTC](https://forum.dynamobim.com/t/how-to-pick-wall-ceiling-and-floor-finishes-and-feed-them-into-the-room-schedule/11579/1 "2017-05-07T07:29:27Z")

</div>

Hi all,

Can someone help me in telling me how to feed all the existing wall,ceiling and floor finishes into an existing Room Area Schedule.  
I have done some of them manually by clicking in the room parameters. But would be very helpful if there is a script which picks up all those finishes and feed them into the schedule.  
Thanks.

Regards,  
Bony

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/0/b044f626c6c2793c30fbabe358676a29c7adf3f2.png)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [May 7, 2017, 6:41pm UTC](https://forum.dynamobim.com/t/how-to-pick-wall-ceiling-and-floor-finishes-and-feed-them-into-the-room-schedule/11579/2 "2017-05-07T18:41:39Z")

</div>

Not quite sure what you are after here. Are you attempting to read the finish materials of the walls, floors and ceilings as currently modeled? Or are attempting to assig a value from a list?

---

<div class="post-metadata">

**Author:** ![bony.george](https://avatars.discourse-cdn.com/v4/letter/b/e19adc/32.png) [@bony.george](https://forum.dynamobim.com/u/bony.george)\
**Post date:** [May 10, 2017, 10:38am UTC](https://forum.dynamobim.com/t/how-to-pick-wall-ceiling-and-floor-finishes-and-feed-them-into-the-room-schedule/11579/3 "2017-05-10T10:38:21Z")

</div>

Hi jacob,

Well. I am trying to read the finish materials of the walls, floors and ceilings as currently modelled.  
The snapshot shows that i had inputted all those CL and TL:values manually.  
I would like to pick up the finishes in every room and schedule them in revit itself.