# How to perform Solar Analysis on individual Curtain Wall Panels using Dynamo?

**URL:** <https://forum.dynamobim.com/t/how-to-perform-solar-analysis-on-individual-curtain-wall-panels-using-dynamo/114926>\
**Category:** Revit\
**Tags:** revit, dynamo\
**Created:** [July 13, 2026, 2:42pm UTC](https://forum.dynamobim.com/t/how-to-perform-solar-analysis-on-individual-curtain-wall-panels-using-dynamo/114926 "2026-07-13T14:42:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mohammad.AlhajPGEZE](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@Mohammad.AlhajPGEZE](https://forum.dynamobim.com/u/Mohammad.AlhajPGEZE)\
**Post date:** [July 13, 2026, 2:42pm UTC](https://forum.dynamobim.com/t/how-to-perform-solar-analysis-on-individual-curtain-wall-panels-using-dynamo/114926/1 "2026-07-13T14:42:23Z")

</div>

Hi everyone,

I am currently working on a project in Revit with a large glass facade (Curtain Wall). I need to perform a **solar analysis** to evaluate **the solar radiation/heat** gain falling **on each individual glass panel** separately.

My goal is to calculate and extract the solar insolation values for every single panel, and ideally, write that data back to a parameter in the panels using Dynamo.

Has anyone tackled a similar workflow? Which specific packages or nodes (e.g., Solar Analysis for Dynamo, Ladybug for Dynamo) would you recommend to achieve this panel-by-panel extraction?

Any advice, sample scripts, or guidance on the logic would be greatly appreciated!

Thanks in advance.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/f/2f44741f5a8ac634dd6088d2085ef2b7d67e0558.png)

---

<div class="post-metadata">

**Author:** ![Mike.Buttery](https://avatars.discourse-cdn.com/v4/letter/m/b19c9b/32.png) [@Mike.Buttery](https://forum.dynamobim.com/u/Mike.Buttery)\
**Post date:** [July 15, 2026, 6:14am UTC](https://forum.dynamobim.com/t/how-to-perform-solar-analysis-on-individual-curtain-wall-panels-using-dynamo/114926/2 "2026-07-15T06:14:18Z")

</div>

Hi Mohammad, welcome 👋  
You could check out the Youtube video by @GavinNicholls  
[Sun hour analysis using Dynamo and Revit (no Ladybug)!](https://www.youtube.com/watch?v=9Xu8i809EFE)