# How to extrude a family in 3d path

**URL:** <https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384>\
**Category:** Geometry\
**Tags:** dynamo\
**Created:** [July 4, 2018, 12:46pm UTC](https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384 "2018-07-04T12:46:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![riazconst2010](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@riazconst2010](https://forum.dynamobim.com/u/riazconst2010)\
**Post date:** [July 4, 2018, 12:46pm UTC](https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384/1 "2018-07-04T12:46:53Z")

</div>

Hi,  
I am trying to create a solid along the 3d line by using sweep node. I can able to extrude but the solid is parallel to the global axis but it should be parallel to the created line.

If anyone has the solution please help me to do this.

Thank in advance  
[Family to soild.dyn](https://forum.dynamobim.com/uploads/short-url/smWObixPZ3XBeOdpNnhRdN8oQUR.dyn) (32.5 KB)

 ![Family%20to%20solid](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/8/a8fed0cb8daac80998686b3d7a2201ac4f18b6bd.png)[Profile.rfa](https://forum.dynamobim.com/uploads/short-url/nVuglWglTUnmWNacW3oxpOZopFi.rfa) (364 KB)

---

<div class="post-metadata">

**Author:** ![salvatoredragotta](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/salvatoredragotta/32/10078_2.png) [@salvatoredragotta](https://forum.dynamobim.com/u/salvatoredragotta)\
**Post date:** [July 5, 2018, 12:37am UTC](https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384/3 "2018-07-05T00:37:33Z")

</div>

@riazconst2010 Try this:

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/9/d9428619affee33f7ecb8b05a0191954721211da.png)

---

<div class="post-metadata">

**Author:** ![riazconst2010](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@riazconst2010](https://forum.dynamobim.com/u/riazconst2010)\
**Post date:** [July 5, 2018, 6:06am UTC](https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384/4 "2018-07-05T06:06:17Z")

</div>

Hi,  
Thanks for your reply.  
I can’t able to find a way to rotate to the curve coordinate.  
If you can figure it out please let me know.

---

<div class="post-metadata">

**Author:** ![riazconst2010](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@riazconst2010](https://forum.dynamobim.com/u/riazconst2010)\
**Post date:** [July 5, 2018, 6:07am UTC](https://forum.dynamobim.com/t/how-to-extrude-a-family-in-3d-path/23384/5 "2018-07-05T06:07:00Z")

</div>

Hi ,  
Thanks for your solution.  
I think it solved my purpose and once again thanks for your timely help.
