# \[Help\] Voronoi with a twist?

**URL:** <https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802>\
**Category:** Geometry\
**Created:** [June 13, 2018, 3:29pm UTC](https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802 "2018-06-13T15:29:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hamamshady](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/hamamshady/32/49557_2.png) [@Hamamshady](https://forum.dynamobim.com/u/Hamamshady)\
**Post date:** [June 13, 2018, 3:29pm UTC](https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802/1 "2018-06-13T15:29:17Z")

</div>

I was in the process of recreating this facade [image](http://payload148.cargocollective.com/1/11/356647/5260292/front-straight-elev_o.jpg), and thought about using dynamo’s _voronoi tessellation_.

 ![BH_dyn_v00](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/5/5508877f4fbd5f6c4a04345ee0ebe185ab2d9c40.png)

I faced two issues in this regard, the first is that the **offset** method I used has a standard thickness, and it doesn’t thicken at the center points, nor it becomes thinner at the middle of the edges…  
The Second I face is that for some reason, the fillet method doesn’t apply to all curves, and it chooses which curves to apply to by alternating the “rightSide” boolean input

Maybe someone can help with this issue?

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [June 15, 2018, 5:24am UTC](https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802/2 "2018-06-15T05:24:41Z")

</div>

> [@Hamamshady](#):
>
> the first is that the **offset** method I used has a standard thickness, and it doesn’t thicken at the center points, nor it becomes thinner at the middle of the edges

It isn’t meant to 🙂

> [@Hamamshady](#):
>
> the fillet method doesn’t apply to all curves, and it chooses which curves to apply to by alternating the “rightSide” boolean input

First fillet with _right side_ set to _true_. Then fillet the output again with _right side_ set to _false_

Alternately you can try something like this…

 ![voronoi](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/4/148a417fc817d552f00475de5c170032e695af4b.png)  
[voronoi.dyn](https://forum.dynamobim.com/uploads/short-url/mUWGkPgdNJ7WBEzwTtaay0el70H.dyn) (34.9 KB)

---

<div class="post-metadata">

**Author:** ![Hamamshady](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/hamamshady/32/49557_2.png) [@Hamamshady](https://forum.dynamobim.com/u/Hamamshady)\
**Post date:** [June 18, 2018, 11:58am UTC](https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802/3 "2018-06-18T11:58:46Z")

</div>

> [@Vikram\_Subbaiah](#):
>
> It isn’t meant to 🙂

I know, I mean I want to find another method to create the result in the picture…

> [@Vikram\_Subbaiah](#):
>
> First fillet with _right side_ set to _true_ . Then fillet the output again with _right side_ set to _false_

Ok, this might actually work will give it a go

> [@Vikram\_Subbaiah](#):
>
> Alternately you can try something like this…

Ok, this is kinda interesting, I will give try this method as well and try to apply it to the current design

Have you found any way to create something similar to the attached photo though?

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [June 20, 2018, 12:38pm UTC](https://forum.dynamobim.com/t/help-voronoi-with-a-twist/22802/4 "2018-06-20T12:38:05Z")

</div>

> [@Hamamshady](#):
>
> Have you found any way to create something similar to the attached photo though?

Haven’t tried it myself, but, fiddling with the TSpline node inputs (end rotation) might get you close.
