# Hanger Support for Pipe/ Duct **URL:** \ **Category:** Revit\ **Tags:** dynamo\ **Created:** [August 27, 2020, 1:35am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492 "2020-08-27T01:35:39Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [August 27, 2020, 1:35am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/1 "2020-08-27T01:35:39Z")
Hi every one, Can i have hanger dynamo to support for pipe and duct in ver 2.5? ---
**Author:** ![Manel\_Fernandez](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/manel_fernandez/32/9123_2.png) [@Manel\_Fernandez](https://forum.dynamobim.com/u/Manel_Fernandez)\ **Post date:** [August 27, 2020, 6:17am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/2 "2020-08-27T06:17:57Z")
Hi [trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09), You could start using the search topic bar for example. Cheers Manel ---
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [August 29, 2020, 9:56am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/3 "2020-08-29T09:56:57Z")
Hi Manel, Can you send me the link for this one? ---
**Author:** ![Manel\_Fernandez](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/manel_fernandez/32/9123_2.png) [@Manel\_Fernandez](https://forum.dynamobim.com/u/Manel_Fernandez)\ **Post date:** [August 31, 2020, 6:06am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/4 "2020-08-31T06:06:22Z")
Hi there, just write hanger in the search topic bar. [https://forum.dynamobim.com/search?q=%20hanger%20dynamo](https://forum.dynamobim.com/search?q=%20hanger%20dynamo) Cheers Manel ---
**Author:** ![ZJRODGERS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/zjrodgers/32/99929_2.png) [@ZJRODGERS](https://forum.dynamobim.com/u/ZJRODGERS)\ **Post date:** [September 1, 2020, 2:11pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/5 "2020-09-01T14:11:49Z")
Should get you everything you need: Hangers Individual Pipes: [02b - INDIVIDUAL PIPE & CONDUIT HANGERS [X].dyn](https://forum.dynamobim.com/uploads/short-url/eulS28O8mif7a4qSy2gPPhvoTrc.dyn) (90.0 KB) [CLEVIS HANGER - PIPES & CONDUIT.rfa](https://forum.dynamobim.com/uploads/short-url/eePQwECJUC0jdZ9zJu4xU000h3X.rfa) (896 KB) [TRAPEZE HANGER - PIPES & CONDUIT.rfa](https://forum.dynamobim.com/uploads/short-url/bjyNAFAiDr2LJJk4cnxENwIPBmX.rfa) (1.0 MB) Hangers Racked Pipes: [02a - RACKED PIPING & CONDUIT HANGERS [X].dyn](https://forum.dynamobim.com/uploads/short-url/qoF78p9lYRx2NPpEnQ1CDFfVgfq.dyn) (214.6 KB) [MULTIPLE PIPE HANGER - Trapeze Hanger.rfa](https://forum.dynamobim.com/uploads/short-url/rJqoGdxn76Inco4OkdDsLJCI6Uw.rfa) (1.0 MB) Hangers Duct: [02c - MECHANICAL DUCT HANGERS [X].dyn](https://forum.dynamobim.com/uploads/short-url/iqghGJ4REQUWFPJvzf7zizKVnug.dyn) (100.1 KB) [TRAPEZE HANGER - DUCTWORK.rfa](https://forum.dynamobim.com/uploads/short-url/77l52cEhpZXE7L6bKomKzmgaVMl.rfa) (1.0 MB) ---
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [September 1, 2020, 3:42pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/6 "2020-09-01T15:42:56Z")
Hi ZJRODGERS Bro, You mean that these can use for Dynamo 2.5 (Revit 2021). Right? Since i am new a newbie in Dynamo so i dont know it can use for Dynamo 2.5 (Revit 2021) or not? ---
**Author:** ![ZJRODGERS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/zjrodgers/32/99929_2.png) [@ZJRODGERS](https://forum.dynamobim.com/u/ZJRODGERS)\ **Post date:** [September 1, 2020, 3:46pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/7 "2020-09-01T15:46:04Z")
should work if you just fine. if it works for you make sure to mark the post as solved to keep the forum nice and clean. ---
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [September 2, 2020, 11:11am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/8 "2020-09-02T11:11:36Z")
it didn’t work in Revit 2021 Bro. May i know which of version that you built dynamo? ---
**Author:** ![ZJRODGERS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/zjrodgers/32/99929_2.png) [@ZJRODGERS](https://forum.dynamobim.com/u/ZJRODGERS)\ **Post date:** [September 2, 2020, 11:32am UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/10 "2020-09-02T11:32:20Z")
Originally it was created in 2.0.4 dynamo is rarely just hitting the run button. you need to download the correct packages and select the correct user inputs. Family parameters need to line up with graph parameters. all of those scripts work flawlessly for me. ---
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [September 2, 2020, 12:45pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/11 "2020-09-02T12:45:39Z")
Let me try. Thank bro for your support. ---
**Author:** ![trongphuongtranbk09](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@trongphuongtranbk09](https://forum.dynamobim.com/u/trongphuongtranbk09)\ **Post date:** [September 2, 2020, 3:04pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/12 "2020-09-02T15:04:52Z")
Unfortunately, Installation dynamo 2.0.4 require install revit 2017, 2018 or 2019. But my revit model was built in revit 2021. Do you have any way to bring it up to revit 2021 ? ![Capture](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/1/6186754cd040fc7d915f2ff549403f60fbba1c0c.png) ---
**Author:** ![nuuvox](https://avatars.discourse-cdn.com/v4/letter/n/6a8cbe/32.png) [@nuuvox](https://forum.dynamobim.com/u/nuuvox)\ **Post date:** [October 26, 2022, 4:47pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/13 "2022-10-26T16:47:37Z")
Thank you so much for these! ---
**Author:** ![ToniAmen](https://avatars.discourse-cdn.com/v4/letter/t/3da27b/32.png) [@ToniAmen](https://forum.dynamobim.com/u/ToniAmen)\ **Post date:** [October 16, 2024, 2:53pm UTC](https://forum.dynamobim.com/t/hanger-support-for-pipe-duct/54492/14 "2024-10-16T14:53:36Z")
hello can some explain how this script works as - supports are hanged from the mid of ducts - supports are fixed above the above slap - also giving some errors as expecting an argument and is given string instead