# Getting the xyz of start and end point a nested adaptive component

**URL:** <https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807>\
**Category:** Uncategorized\
**Created:** [August 24, 2016, 3:42pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807 "2016-08-24T15:42:35Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![James\_Washbourne](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@James\_Washbourne](https://forum.dynamobim.com/u/James_Washbourne)\
**Post date:** [August 24, 2016, 3:42pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/1 "2016-08-24T15:42:35Z")

</div>

Hi all,

As the topic suggests, I’m wondering is possible to get the X,Y,Z co-ordinates of the end points of a nested adaptive component.

Cheers

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [August 24, 2016, 5:40pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/2 "2016-08-24T17:40:12Z")

</div>

Hi James,

Could you drop files or images of your adaptive component so that others can help you. Thanks 🙂

---

<div class="post-metadata">

**Author:** ![James\_Washbourne](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@James\_Washbourne](https://forum.dynamobim.com/u/James_Washbourne)\
**Post date:** [August 25, 2016, 3:06pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/3 "2016-08-25T15:06:07Z")

</div>

Kulkul,

Here you go, its basically a 3 point adaptive with with two types of nested adaptive components.

Cheers

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/4/4aae44d6c40002b4a96364670283df48f5d28cf0.jpg)

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [August 25, 2016, 3:11pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/4 "2016-08-25T15:11:03Z")

</div>

Is it possible to drop adaptive family as well.

---

<div class="post-metadata">

**Author:** ![James\_Washbourne](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@James\_Washbourne](https://forum.dynamobim.com/u/James_Washbourne)\
**Post date:** [August 25, 2016, 3:14pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/5 "2016-08-25T15:14:44Z")

</div>

Here it is slightly modified from the previous one. same principle.[web upload.rfa](https://forum.dynamobim.com/uploads/short-url/2Bhk2ccRsij4PSCU0dsJFToKyXU.rfa) (708 KB)

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [August 25, 2016, 3:33pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/6 "2016-08-25T15:33:12Z")

</div>

There is a node from clockwork package called “FamilyInstance.SubComponents” to get nested family. Try using that see if that helps.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/b/b309b1f2d3843a971b1b053118a4eeed64bf20f6.png)

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [August 25, 2016, 6:21pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/7 "2016-08-25T18:21:19Z")

</div>

Nested families, if _Shared_, are listed in _Family Types_  
While you can extract their geometry (and inefficiently extract required info), seems like their adaptive points aren’t accessible.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/b/b4e684d7ff6bc0919edaa31d762fdcc37dc309a1.png)

---

<div class="post-metadata">

**Author:** ![James\_Washbourne](https://avatars.discourse-cdn.com/v4/letter/j/e19adc/32.png) [@James\_Washbourne](https://forum.dynamobim.com/u/James_Washbourne)\
**Post date:** [August 26, 2016, 2:39pm UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/8 "2016-08-26T14:39:38Z")

</div>

Cheers both! Sorry for the late reply

---

<div class="post-metadata">

**Author:** ![amerVGDHF](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@amerVGDHF](https://forum.dynamobim.com/u/amerVGDHF)\
**Post date:** [May 9, 2021, 12:31am UTC](https://forum.dynamobim.com/t/getting-the-xyz-of-start-and-end-point-a-nested-adaptive-component/5807/9 "2021-05-09T00:31:55Z")

</div>

Hi @Vikram_Subbaiah  
Could you please suggest instead of adaptive family(FAMILY1)if it’s normal extrusion family and a nested point family (P1)in it.can we extract the exact xyz values from nested family (P1)and fill them in its associated family(FAMILY1).

it’s working if one family used in a category,what if we have multiple families in same category,as they values of parameters gets placed in any families,can we select proper elements for filling the values.
