# Getting output as wall with chamfer instead of solid

**URL:** <https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853>\
**Category:** Developers\
**Tags:** python, dynamo\
**Created:** [April 9, 2018, 10:44am UTC](https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853 "2018-04-09T10:44:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![robert12546358](https://avatars.discourse-cdn.com/v4/letter/r/c5a1d2/32.png) [@robert12546358](https://forum.dynamobim.com/u/robert12546358)\
**Post date:** [April 9, 2018, 10:44am UTC](https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853/1 "2018-04-09T10:44:06Z")

</div>

Hi There

Can anyone help to get output of wall. Here input is wall, then i added chamfer but output is solid instead of wall as circled red on top left side.

 ![69](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/4/64fa60c230eebed350567113064996754ce82ec0.JPG)

---

<div class="post-metadata">

**Author:** ![Nick\_Boyts](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/nick_boyts/32/76313_2.png) [@Nick\_Boyts](https://forum.dynamobim.com/u/Nick_Boyts)\
**Post date:** [April 9, 2018, 4:10pm UTC](https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853/2 "2018-04-09T16:10:32Z")

</div>

That’s because you using a Geometry Import. You need to use one of the Wall.Create methods then apply a chamfer to your new wall.

---

<div class="post-metadata">

**Author:** ![robert12546358](https://avatars.discourse-cdn.com/v4/letter/r/c5a1d2/32.png) [@robert12546358](https://forum.dynamobim.com/u/robert12546358)\
**Post date:** [April 10, 2018, 2:48am UTC](https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853/3 "2018-04-10T02:48:52Z")

</div>

I create a wall method then i set chamfer, but output is not a **Wall**.

see below graph and say to me what is wrong.

 ![70](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/3/a395a7e46b393a0e4d2761828206cc3f41990f16.JPG)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [April 10, 2018, 2:57am UTC](https://forum.dynamobim.com/t/getting-output-as-wall-with-chamfer-instead-of-solid/20853/4 "2018-04-10T02:57:32Z")

</div>

you haven’t pushed the chamfer into the arevit model. Note that walls don’t have a method for editing the geometry like this in Revit. You have to add things to them. Things like void extrusions. You could make a generic model with that type of geometry though. Or an in place family. Or a few other options. But you can’t edir the geometry of a system family directly like that.
