# Get list of conduits & fittings from all conduit runs

**URL:** <https://forum.dynamobim.com/t/get-list-of-conduits-fittings-from-all-conduit-runs/37753>\
**Category:** Lists-Logic\
**Created:** [June 29, 2019, 7:50pm UTC](https://forum.dynamobim.com/t/get-list-of-conduits-fittings-from-all-conduit-runs/37753 "2019-06-29T19:50:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AmolShah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/amolshah/32/103244_2.png) [@AmolShah](https://forum.dynamobim.com/u/AmolShah)\
**Post date:** [June 29, 2019, 7:50pm UTC](https://forum.dynamobim.com/t/get-list-of-conduits-fittings-from-all-conduit-runs/37753/1 "2019-06-29T19:50:37Z")

</div>

I have a bunch of conduit runs in a project [24 in the image below]

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/5/952a8d972340182680926ccddaa6912f3f0ff205.png)

I can get the elements in the conduit runs if I manually select the start/end of all runs as shown below.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/3/c31f4f11a6967f7c9f63df0b850dbe1ccd330046.png)

But for larger projects it is not possible to select each start/end conduit manually.

And if I try to take input using the method below, I get repeated conduit runs (list jumps to 668 instead of 142).  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/5/35717833928526b3b450b3d83045487e664ca89b.png)

Is there a way to just get the start/end of all conduit runs?  
Or to get a unique list even after using the _All Elements of Category_ node?

You can find the Revit 2019 file for the runs in the images below  
[Pipe Runs.rvt](https://forum.dynamobim.com/uploads/short-url/5wRKi9vCep3CaJY5muKCRC8REjk.rvt) (872 KB)

---

<div class="post-metadata">

**Author:** ![T\_Pover](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/t_pover/32/19147_2.png) [@T\_Pover](https://forum.dynamobim.com/u/T_Pover)\
**Post date:** [June 30, 2019, 12:25pm UTC](https://forum.dynamobim.com/t/get-list-of-conduits-fittings-from-all-conduit-runs/37753/2 "2019-06-30T12:25:51Z")

</div>

Sadly there is no way to get the conduits from a conduit. I posted an alternative solution here: [https://forum.dynamobim.com/t/getting-all-connected-elements-of-a-single-conduit-run-by-splitting-a-list-of-all-conduit-runs/25281](https://forum.dynamobim.com/t/getting-all-connected-elements-of-a-single-conduit-run-by-splitting-a-list-of-all-conduit-runs/25281)

---

<div class="post-metadata">

**Author:** ![AmolShah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/amolshah/32/103244_2.png) [@AmolShah](https://forum.dynamobim.com/u/AmolShah)\
**Post date:** [June 30, 2019, 7:15pm UTC](https://forum.dynamobim.com/t/get-list-of-conduits-fittings-from-all-conduit-runs/37753/3 "2019-06-30T19:15:56Z")

</div>

Your alternative is much more efficient than the graph that I made for the same.

Thank you. 😄