# Get Center Point of Wall

**URL:** <https://forum.dynamobim.com/t/get-center-point-of-wall/82978>\
**Category:** Revit\
**Tags:** revit, geometry, dynamo\
**Created:** [November 10, 2022, 7:14pm UTC](https://forum.dynamobim.com/t/get-center-point-of-wall/82978 "2022-11-10T19:14:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gdawsonfc](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gdawsonfc/32/149864_2.png) [@gdawsonfc](https://forum.dynamobim.com/u/gdawsonfc)\
**Post date:** [November 10, 2022, 7:14pm UTC](https://forum.dynamobim.com/t/get-center-point-of-wall/82978/1 "2022-11-10T19:14:46Z")

</div>

Hi,

I’m starting to study Dynamo.  
I would like to know how to get the center point of a wall, I started by selecting the category but now I can’t get the return of the center point.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/7/97b710e55e53358b128c84980eda4dc2055bc14b.png)

---

<div class="post-metadata">

**Author:** ![christian.stan](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/christian.stan/32/166296_2.png) [@christian.stan](https://forum.dynamobim.com/u/christian.stan)\
**Post date:** [November 10, 2022, 7:22pm UTC](https://forum.dynamobim.com/t/get-center-point-of-wall/82978/2 "2022-11-10T19:22:00Z")

</div>

Hello,

you plug in the Curve.PointatParameter node  
with a parameter of 0.5

edit: If you are looking for the center of gravity of the wall, you have to plug the 2 nodes in series (Element.Solid and Centroid) at the output of your Elements.

cordially  
christian.stan