# Get and set Pipe Custom Part Properties

**URL:** <https://forum.dynamobim.com/t/get-and-set-pipe-custom-part-properties/92854>\
**Category:** Civil 3D\
**Created:** [August 14, 2023, 10:45am UTC](https://forum.dynamobim.com/t/get-and-set-pipe-custom-part-properties/92854 "2023-08-14T10:45:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![karien.vanheerden](https://avatars.discourse-cdn.com/v4/letter/k/dc4da7/32.png) [@karien.vanheerden](https://forum.dynamobim.com/u/karien.vanheerden)\
**Post date:** [August 14, 2023, 10:45am UTC](https://forum.dynamobim.com/t/get-and-set-pipe-custom-part-properties/92854/1 "2023-08-14T10:45:29Z")

</div>

Hi All

We have an external vendor that develops pipe catalogues for us, as part of this service they also provide an add-on analysis tool, this tool required that pipes (and structures) to have some additional data programmed into the Part properties. see screenshot below:

 ![2023-08-14 12_30_45-Window](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/c/3c56b0b2f86f7ca542922e1115e68a250926ab0a.png)

I want to use these properties for:

- Various reports and labels
- Set properties from spreadsheet info exported from other software

Is there any way I can get (and ultimately set) the info of these custom properties?  
the normal “get.parameters” doesn’t work - I suspect python would be required, but I am not really sure where to start looking as these are not standard property sets or parameters.

 ![custom_pipes](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/b/cb8f07dfe08e045301a57f879a289e2bb5277ce5.png)

---

<div class="post-metadata">

**Author:** ![hosneyalaa](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/hosneyalaa/32/100865_2.png) [@hosneyalaa](https://forum.dynamobim.com/u/hosneyalaa)\
**Post date:** [August 14, 2023, 11:03am UTC](https://forum.dynamobim.com/t/get-and-set-pipe-custom-part-properties/92854/2 "2023-08-14T11:03:36Z")

</div>

Hi  
Check in camber package

Like this

> [@Pipe Material form part properties](https://forum.dynamobim.com/t/pipe-material-form-part-properties/57976/18):
>
> Hi @francolaca, Check out this node in [Camber v3.0.0](https://github.com/mzjensen/Camber/releases/tag/v3.0.0). It will return a dictionary of the part data values. [pressurePartData]

If not find good node for you  
Can you attached example drawing

Maybe you need python code

> [@Pipe Part Data Record Error](https://forum.dynamobim.com/t/pipe-part-data-record-error/87677/4):
>
> Check pipeBedClsFld.IsFromList = true Then pipeBedClsFld.ValueList [IMG\_٢٠٢٣٠٣٢٣\_٢٠٠٥٤١]

---

<div class="post-metadata">

**Author:** ![karien.vanheerden](https://avatars.discourse-cdn.com/v4/letter/k/dc4da7/32.png) [@karien.vanheerden](https://forum.dynamobim.com/u/karien.vanheerden)\
**Post date:** [August 14, 2023, 11:49am UTC](https://forum.dynamobim.com/t/get-and-set-pipe-custom-part-properties/92854/3 "2023-08-14T11:49:50Z")

</div>

Thanks @hosneyalaa that works perfectly

 ![2023-08-14 13_48_43-Window](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/7/5734cc25996d64347792c071343c059c1ff731ae.png)
