# Generative design study not giving outputs and geometry

**URL:** <https://forum.dynamobim.com/t/generative-design-study-not-giving-outputs-and-geometry/106283>\
**Category:** Revit\
**Tags:** dynamo, generative-design\
**Created:** [December 3, 2024, 9:43am UTC](https://forum.dynamobim.com/t/generative-design-study-not-giving-outputs-and-geometry/106283 "2024-12-03T09:43:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![neelDZKPU](https://avatars.discourse-cdn.com/v4/letter/n/e0b2c6/32.png) [@neelDZKPU](https://forum.dynamobim.com/u/neelDZKPU)\
**Post date:** [December 3, 2024, 9:43am UTC](https://forum.dynamobim.com/t/generative-design-study-not-giving-outputs-and-geometry/106283/1 "2024-12-03T09:43:06Z")

</div>

Hi guys,  
I am working on a Generative design script in Revit 2023 to pack LGS panels inside container. I tried a lot of ways but i am not getting any result while running in the GD engine. But in Dynamo its working perfectly for every inputs. Can you guys please check.

Link for Model and script :[Packing Cubes - Google Drive](https://drive.google.com/drive/folders/1k0K0mjRVDywYwg9VJv_oHelbebMkX1FE?usp=sharing)