# From Sketchup faces to Revit elements

**URL:** <https://forum.dynamobim.com/t/from-sketchup-faces-to-revit-elements/30651>\
**Category:** Revit\
**Tags:** revit, geometry, dynamo\
**Created:** [January 14, 2019, 7:21am UTC](https://forum.dynamobim.com/t/from-sketchup-faces-to-revit-elements/30651 "2019-01-14T07:21:34Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Mark.Ackerley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mark.ackerley/32/79310_2.png) [@Mark.Ackerley](https://forum.dynamobim.com/u/Mark.Ackerley)\
**Post date:** [January 14, 2019, 10:21am UTC](https://forum.dynamobim.com/t/from-sketchup-faces-to-revit-elements/30651/2 "2019-01-14T10:21:54Z")

</div>

Hey,

So bits of the functionality exist, but I’m not sure about the whole process?

For example, to map your Revit families to Sketchup families, you can easily enough have a graph to compare the directory of skp components to Revit families…  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/f/2f68caf02cd10296ea919f57cd689383e098adde.png)

But I think you’ll have to find a way of importing the sketchup so that you can interrogate it and get the location and rotation of the Components? Perhaps this functionality is somewhere, but I don’t know of it.

Then you can place them all using Dynamo. I have done this kind of thing to optimise a 3D printing graph.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/d/8d4a68e4b3dc69b48a50540c215cd7f851a1ccf4.png)

You can get lines from a dwg and generate a Revit walls from them… However given the ‘sketchy’ nature of most sketchup (and CAD) models, this workflow has never appealed to me. I take the opportunity to redraft in Revit correctly.  
Here’s a thread…

> [@Create walls from Cad link lines](https://forum.dynamobim.com/t/create-walls-from-cad-link-lines/25396):
>
> Hii All, I\m trying to create a walls from cad link but the issue is that i can\t convert double lines of the wall in cad into a surface to create a wall in Revit… Any help ?? I also have tried to create walls from curves but this lead to a double wall in revit as shown below

Personally for $100 a year, I’d probably use theirs and discuss whether they can add the extra functionality you’re after 😃

Hope that’s of interest, best of luck,

Mark

---

_[View the full topic](https://forum.dynamobim.com/t/from-sketchup-faces-to-revit-elements/30651)._
