# FloorPlan.Byroom

**URL:** <https://forum.dynamobim.com/t/floorplan-byroom/49459>\
**Category:** Uncategorized\
**Created:** [April 17, 2020, 12:59pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459 "2020-04-17T12:59:33Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cem\_Altineller](https://avatars.discourse-cdn.com/v4/letter/c/8491ac/32.png) [@Cem\_Altineller](https://forum.dynamobim.com/u/Cem_Altineller)\
**Post date:** [April 17, 2020, 12:59pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/1 "2020-04-17T12:59:34Z")

</div>

Hi all,

FloorPlan.Byroom is great. Is there any method to create the same thing with ceiling plans? Can I convert a floor plan into a ceiling plan?

---

<div class="post-metadata">

**Author:** ![Konrad\_K\_Sobon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/konrad_k_sobon/32/8838_2.png) [@Konrad\_K\_Sobon](https://forum.dynamobim.com/u/Konrad_K_Sobon)\
**Post date:** [April 17, 2020, 2:12pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/2 "2020-04-17T14:12:30Z")

</div>

I don’t have a node for that, but…if you post that idea here: [https://github.com/ksobon/archilab/issues](https://github.com/ksobon/archilab/issues) I might be able to have a look at it at some point.

Most likely someone will beat me to it here. 🙂

---

<div class="post-metadata">

**Author:** ![patrick\_podeyn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/patrick_podeyn/32/86368_2.png) [@patrick\_podeyn](https://forum.dynamobim.com/u/patrick_podeyn)\
**Post date:** [April 17, 2020, 3:46pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/3 "2020-04-17T15:46:40Z")

</div>

MEPover has a node to set a view crop by curves, you’ll need to extract the curves of a room via the boundary.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/a/7abc7cebf87391c5364e4db834a546ad4a13e304.png)

**Hope this helps!**

---

<div class="post-metadata">

**Author:** ![Konrad\_K\_Sobon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/konrad_k_sobon/32/8838_2.png) [@Konrad\_K\_Sobon](https://forum.dynamobim.com/u/Konrad_K_Sobon)\
**Post date:** [April 19, 2020, 10:26pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/4 "2020-04-19T22:26:49Z")

</div>

This should do:

 ![2_FloorCeilingPlanByRoom_2020-04-19_05-26-06](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/7/07527b18d2c5d1bdb45e73fda7fa01a3294b5c39.png)

Here’s a full write up: [https://archi-lab.net/create-ceiling-plan-by-room/](https://archi-lab.net/create-ceiling-plan-by-room/)

---

<div class="post-metadata">

**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\
**Post date:** [April 19, 2020, 11:14pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/5 "2020-04-19T23:14:06Z")

</div>

> [@Overriding REVIT prompt in Dynamo](https://forum.dynamobim.com/t/overriding-revit-prompt-in-dynamo/29124/5):
>
> CeilingPlan.ByRoom: You would need to find the “FloorPlan” references and change them to “CeilingPlan” Here is from the Original Node: [image] Here are the edits to make ceiling plans: The inputs remain the same as the original node: [image] Copyright(c) 2015, Konrad K Sobon # @arch\_laboratory, http://archi-lab.net import clr clr.AddReference('ProtoGeometry') from Autodesk.DesignScript.Geometry import \* # Import Element wrapper extension methods clr.AddReference(&quot;RevitNod…

Just barley beat @Konrad_K_Sobon to his own work, haha!

Great post and thanks for the additional nodes and better room boundary crop!

---

<div class="post-metadata">

**Author:** ![Cem\_Altineller](https://avatars.discourse-cdn.com/v4/letter/c/8491ac/32.png) [@Cem\_Altineller](https://forum.dynamobim.com/u/Cem_Altineller)\
**Post date:** [April 20, 2020, 7:33am UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/6 "2020-04-20T07:33:41Z")

</div>

Wow that was really good. Thank you guys.

---

<div class="post-metadata">

**Author:** ![Konrad\_K\_Sobon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/konrad_k_sobon/32/8838_2.png) [@Konrad\_K\_Sobon](https://forum.dynamobim.com/u/Konrad_K_Sobon)\
**Post date:** [April 20, 2020, 4:10pm UTC](https://forum.dynamobim.com/t/floorplan-byroom/49459/7 "2020-04-20T16:10:52Z")

</div>

Hahaha, I had no idea this was out there, but that was the idea. It literally needed a change from FloorPlan to CeilingPlan. Thanks for sharing!
