# Floor point not now working **URL:** \ **Category:** Revit\ **Created:** [January 20, 2025, 11:17am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345 "2025-01-20T11:17:51Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 11:17am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/1 "2025-01-20T11:17:52Z")
Floor points not working. Why not. Script worked fine last week! ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/2/c2dedd1b3d9ac7db137425c64c4d9696e97fd4f4.png) ---
**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\ **Post date:** [January 20, 2025, 11:20am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/2 "2025-01-20T11:20:08Z")
Hi @Gcf_Design does it work without list create first ? or some lacing ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 11:22am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/3 "2025-01-20T11:22:17Z")
Here it is directly connected, same issue. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/1/917c0d80a5a06f47518b9cb01b15c750d9884a85.png) ---
**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\ **Post date:** [January 20, 2025, 11:42am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/4 "2025-01-20T11:42:04Z")
allright im not at dyn right now…but if i remember that node sometimes fail, and sometimes work for me with disconnect- run, connect again and run…but not sure in your case ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 11:43am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/5 "2025-01-20T11:43:27Z")
I shall try ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 11:46am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/6 "2025-01-20T11:46:50Z")
No joy. Ridiculous, because it’s worked fine for a long time and earlier today it worked and not it does not. I have restarted both Revit and even the PC, no joy. ---
**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\ **Post date:** [January 20, 2025, 11:49am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/7 "2025-01-20T11:49:30Z")
hmmm yeah, just a shot have tried replace the node with a fresh one…ps guess clockwork have one as well you could try… ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 11:53am UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/8 "2025-01-20T11:53:25Z")
I have tried a fresh one. I cannot find the equivalent node in Clockwork? ---
**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\ **Post date:** [January 20, 2025, 12:01pm UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/9 "2025-01-20T12:01:14Z")
yeah probably i remember wrong 😉 another one sometimes 😉 copy all nodes to a new dyn and try again…but absolutely not sure here… ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 12:04pm UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/10 "2025-01-20T12:04:39Z")
I shall try that ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 12:06pm UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/11 "2025-01-20T12:06:07Z")
Sadly no. 🙁 ---
**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\ **Post date:** [January 20, 2025, 1:10pm UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/12 "2025-01-20T13:10:47Z")
Guessing it’s an issue with the model. Start a new model with a new floor and recreate the issue with a new floor and a simple .dyn (`Select Model Element` \> `Floor.Points` node ). If you can’t do so look at what differs between the floor in your failing project and this one. If you can recreate it post that file and the simple .dyn. If you can’t identify it there then remove everything except the one failing floor (all views but one 3d view, all levels but the host, all model elements, all textures, etc.) and post that and the simple .dyn. ---
**Author:** ![Gcf\_Design](https://avatars.discourse-cdn.com/v4/letter/g/77aa72/32.png) [@Gcf\_Design](https://forum.dynamobim.com/u/Gcf_Design)\ **Post date:** [January 20, 2025, 7:23pm UTC](https://forum.dynamobim.com/t/floor-point-not-now-working/107345/13 "2025-01-20T19:23:08Z")
I shall look into that and get back on here.