# Floor Move Points

**URL:** https://forum.dynamobim.com/t/floor-move-points/39735
**Category:** Uncategorized
**Created:** [August 21, 2019, 5:29pm UTC](https://forum.dynamobim.com/t/floor-move-points/39735 "2019-08-21T17:29:02Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![r.lietz](https://avatars.discourse-cdn.com/v4/letter/r/8e8cbc/32.png) [@r.lietz](https://forum.dynamobim.com/u/r.lietz)
#### Post date: [August 21, 2019, 5:29pm UTC](https://forum.dynamobim.com/t/floor-move-points/39735/1 "2019-08-21T17:29:02Z")

</div>

For those working in SI.

My dad said, son use the KISS principle (keep it simple stupid), so I did, but what’s happening here ?

 ![MOVE_POINTS](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/0/80eb72cbfe7af10c57278356bda2dcc9e8a96fe5.jpeg)  
 ![FLOOR_MOVE_POINTS](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/b/ab9077f1d2cfdf4950aea8ac39e7767b86be99d4.jpeg)

After a while I realized the input needed a conversion from m (mm) to feet. I know it’s nearly 30 years since the wall came down, but I didn’t think there was still a problem with unification.

Anyway he always said put your best foot forward.  
[MOVE\_FLOOR\_POINTS.dyn](https://forum.dynamobim.com/uploads/short-url/yhn4qC94xtPSa3hLWjExhbiK1Hg.dyn) (12.1 KB)  
Dynamo Revit 2.0.2.6833

Further reading - [Floor.Points node not working in one run](https://forum.dynamobim.com/t/floor-points-node-not-working-in-one-run/14414)