# Floor drawing problem from a polycurve

**URL:** <https://forum.dynamobim.com/t/floor-drawing-problem-from-a-polycurve/79679>\
**Category:** Revit\
**Tags:** geometry, dynamo\
**Created:** [August 9, 2022, 9:35am UTC](https://forum.dynamobim.com/t/floor-drawing-problem-from-a-polycurve/79679 "2022-08-09T09:35:08Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![christian.stan](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/christian.stan/32/166296_2.png) [@christian.stan](https://forum.dynamobim.com/u/christian.stan)\
**Post date:** [August 9, 2022, 11:13am UTC](https://forum.dynamobim.com/t/floor-drawing-problem-from-a-polycurve/79679/3 "2022-08-09T11:13:22Z")

</div>

Hello, look this way, I think the subject is close to yours

> [@Error - The multiplicities of other interior knots must be at most degree - 2](https://forum.dynamobim.com/t/error-the-multiplicities-of-other-interior-knots-must-be-at-most-degree-2/79622/4):
>
> This should do the trick: [Dynamo Dictionary](https://dictionary.dynamobim.com/#/Geometry/Curve/Action/ApproximateWithArcAndLineSegments)

Cordially  
christian.stan

---

_[View the full topic](https://forum.dynamobim.com/t/floor-drawing-problem-from-a-polycurve/79679)._