# Floor by outline, type, and level **URL:** \ **Category:** Revit\ **Created:** [September 14, 2018, 5:06am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887 "2018-09-14T05:06:01Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![abhijeetraje](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@abhijeetraje](https://forum.dynamobim.com/u/abhijeetraje)\ **Post date:** [September 14, 2018, 5:06am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/1 "2018-09-14T05:06:01Z")
Hi I want to create a workflow to create floors from room outline. Only problem I have is how to give it “Height Offset By Level”. This we can give when we are creating the floors manually. Is there a node/ way so that we can also give this offset from the level? Attached is what I mad just for creating the floors by room outline , level and type- which is working OK.[floor by room extent.dyn](https://forum.dynamobim.com/uploads/short-url/ueoSnbUKYpGRlaVg0ewnhO9nICF.dyn) (29.8 KB) ---
**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\ **Post date:** [September 14, 2018, 8:29am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/2 "2018-09-14T08:29:33Z")
It’s a Properrty so you can use the Set Paremeter Value for that ---
**Author:** ![abhijeetraje](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@abhijeetraje](https://forum.dynamobim.com/u/abhijeetraje)\ **Post date:** [September 14, 2018, 8:40am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/3 "2018-09-14T08:40:58Z")
OK. Thanks for the inputs. Do you mean that first I create the floors, and then select them and change parameters? Selecting all newly created floors will be changeling. ---
**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\ **Post date:** [September 14, 2018, 9:41am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/4 "2018-09-14T09:41:10Z")
You get them from the output list of the floorcreation, you do it in the same go 🙂 ---
**Author:** ![abhijeetraje](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@abhijeetraje](https://forum.dynamobim.com/u/abhijeetraje)\ **Post date:** [September 14, 2018, 10:21am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/5 "2018-09-14T10:21:36Z")
OK. Thanks a lot.😄 ---
**Author:** ![abhijeetraje](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@abhijeetraje](https://forum.dynamobim.com/u/abhijeetraje)\ **Post date:** [September 14, 2018, 10:46am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/6 "2018-09-14T10:46:05Z")
This works. [floor by room extent.dyn](https://forum.dynamobim.com/uploads/short-url/luYufhbNxc4sOWEHzES3HuvQPKC.dyn) (34.7 KB) Now I am trying to do it so that the floors are made on respective level where the room is. Some error is coming. Could you just check this out?[floor by room extent on respective level.dyn](https://forum.dynamobim.com/uploads/short-url/8kq6w9S8TaynFblfabgCBs15fNW.dyn) (20.4 KB) and this is the error. ![14-09-2018%201616](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/d/2d644661e46b79e1ccb81d78090c7356dc2950de.png) ---
**Author:** ![Daniel\_Hurtubise](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/daniel_hurtubise/32/146534_2.png) [@Daniel\_Hurtubise](https://forum.dynamobim.com/u/Daniel_Hurtubise)\ **Post date:** [September 17, 2018, 10:35am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/7 "2018-09-17T10:35:44Z")
Some inputs are wrong, can you show the levels and expand the polycurve please? ---
**Author:** ![abhijeetraje](https://avatars.discourse-cdn.com/v4/letter/a/a183cd/32.png) [@abhijeetraje](https://forum.dynamobim.com/u/abhijeetraje)\ **Post date:** [September 17, 2018, 11:35am UTC](https://forum.dynamobim.com/t/floor-by-outline-type-and-level/25887/8 "2018-09-17T11:35:34Z")
Hey… I got it to work. Basically I had to call the levels from the selected level names. ![17-09-2018%201703](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/a/4a82944d4686310cb93e744d0c8e6458ad2a78db.png)