# Featureline Cant and dynamo expression

**URL:** <https://forum.dynamobim.com/t/featureline-cant-and-dynamo-expression/77370>\
**Category:** Civil 3D\
**Tags:** dynamo, civil3d\
**Created:** [June 7, 2022, 8:45am UTC](https://forum.dynamobim.com/t/featureline-cant-and-dynamo-expression/77370 "2022-06-07T08:45:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mircea.nicolauLEH2A](https://avatars.discourse-cdn.com/v4/letter/m/0ea827/32.png) [@mircea.nicolauLEH2A](https://forum.dynamobim.com/u/mircea.nicolauLEH2A)\
**Post date:** [June 7, 2022, 8:45am UTC](https://forum.dynamobim.com/t/featureline-cant-and-dynamo-expression/77370/1 "2022-06-07T08:45:38Z")

</div>

Hello everybody I need some assistance in some major problem. The script that I made it will put some block in a corridor using a feature line, but I bet that everyone of you knows how to do it. The problem that I have is following, when I put a tie rail as a block it will put following a feature line but it wll not put that block when a fetureline has Cant, that because I did not find an expression that will help me doing so  
So, this picture will be with dynamo script

 ![Pic2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/6/4605c1e2fe93ce5b37e609c719f12f5e6b02b183.png)

Please anyone could help in this matter?  
The same problem I have when I put some NewJerssey parapet in ax road and in some cases it wil put it in stairs, and that is not ok!

Thank you all

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [June 7, 2022, 1:26pm UTC](https://forum.dynamobim.com/t/featureline-cant-and-dynamo-expression/77370/2 "2022-06-07T13:26:36Z")

</div>

Hi @mircea.nicolauLEH2A,

Can you take a look at this thread and see if it helps you?

> [@Place Block along Rail with CANT](https://forum.dynamobim.com/t/place-block-along-rail-with-cant/60920/2):
>
> Hi @aa047 , I’m not a rail expert, but could you get coordinate systems along the profile at the desired sleeper locations and then rotate them? [Cant Example.dwg](https://forum.dynamobim.com/uploads/short-url/uXPcgXZocPmar8uKsSAE9zdQLNp.dwg) (1.5 MB) [Cant Example.dyn](https://forum.dynamobim.com/uploads/short-url/gWfOqErwL9KkttdcMQbyU1Mf8xl.dyn) (935.3 KB) [Cant]

---

<div class="post-metadata">

**Author:** ![mircea.nicolauLEH2A](https://avatars.discourse-cdn.com/v4/letter/m/0ea827/32.png) [@mircea.nicolauLEH2A](https://forum.dynamobim.com/u/mircea.nicolauLEH2A)\
**Post date:** [June 8, 2022, 8:56am UTC](https://forum.dynamobim.com/t/featureline-cant-and-dynamo-expression/77370/3 "2022-06-08T08:56:01Z")

</div>

Yes, that is it for rail!

Many thanks Jensen!!!
