# Exporting Dynamo to Revit

**URL:** <https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595>\
**Category:** Revit\
**Tags:** geometry\
**Created:** [February 3, 2019, 10:44am UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595 "2019-02-03T10:44:52Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![couch1898](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@couch1898](https://forum.dynamobim.com/u/couch1898)\
**Post date:** [February 3, 2019, 1:16pm UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595/21 "2019-02-03T13:16:56Z")

</div>

hi, its msabchev96 again. i couldn’t post more replies for the day, since i made the account today. I tried with that node the first time, but it still wouldn’t even show the geometry in revit 3d

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [February 3, 2019, 2:12pm UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595/22 "2019-02-03T14:12:02Z")

</div>

if it doesn’t work like in this thread, maybe someone else can help

> [@Export geometry Dynamo to Mass Revit](https://forum.dynamobim.com/t/export-geometry-dynamo-to-mass-revit/18948/2):
>

---

<div class="post-metadata">

**Author:** ![couch1898](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@couch1898](https://forum.dynamobim.com/u/couch1898)\
**Post date:** [February 3, 2019, 2:14pm UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595/23 "2019-02-03T14:14:55Z")

</div>

sadly, it doesn’t. i looked and tried everything i could find on forums and youtube before posting this thread

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [February 3, 2019, 2:29pm UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595/24 "2019-02-03T14:29:19Z")

</div>

one advice:  
try to keep your graph simple and don’t change direction when you are halfway there  
it was pretty messy  
start at the beginning and end and work your way to connect the two  
when something doesn’t work delete it  
when you finally have the mass visible in Revit use Tab-select to get to the faces you need when using floor by face.

good luck

---

<div class="post-metadata">

**Author:** ![couch1898](https://avatars.discourse-cdn.com/v4/letter/c/dc4da7/32.png) [@couch1898](https://forum.dynamobim.com/u/couch1898)\
**Post date:** [February 3, 2019, 2:30pm UTC](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595/25 "2019-02-03T14:30:32Z")

</div>

okay, thank you for your time!

[Previous page](https://forum.dynamobim.com/t/exporting-dynamo-to-revit/31595.md?page=1)