# Error creating solids

**URL:** <https://forum.dynamobim.com/t/error-creating-solids/71355>\
**Category:** Civil 3D\
**Created:** [December 13, 2021, 9:29pm UTC](https://forum.dynamobim.com/t/error-creating-solids/71355 "2021-12-13T21:29:45Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [December 15, 2021, 11:05pm UTC](https://forum.dynamobim.com/t/error-creating-solids/71355/11 "2021-12-15T23:05:24Z")

</div>

I’ll bump this again:

> [@Object not brought into Dynamo](https://forum.dynamobim.com/t/object-not-brought-into-dynamo/54922/5):
>
> Leave the geometry scaling set to Medium even though you get the warnings. Changing to Large or Extra Large will make the warnings go away, but it will introduce other issues. It is a known problem with Dynamo’s integration with Civil 3D and the fact that us civil engineers typically work in real-world (i.e. very large) coordinates. Some other documentation:

Leave the Geometry Scaling set to medium, even if it looks funny in Dynamo. The data will come into Civil 3D correctly despite how it appears in Dynamo. If you change the Geometry Scaling setting, then there is risk of the data not being transferred to Civil 3D correctly.

---

_[View the full topic](https://forum.dynamobim.com/t/error-creating-solids/71355)._