# Element.solids get different result for a family with two direction

**URL:** <https://forum.dynamobim.com/t/element-solids-get-different-result-for-a-family-with-two-direction/21698>\
**Category:** Revit\
**Created:** [May 7, 2018, 7:15am UTC](https://forum.dynamobim.com/t/element-solids-get-different-result-for-a-family-with-two-direction/21698 "2018-05-07T07:15:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![legalid](https://avatars.discourse-cdn.com/v4/letter/l/bcef8e/32.png) [@legalid](https://forum.dynamobim.com/u/legalid)\
**Post date:** [May 7, 2018, 7:15am UTC](https://forum.dynamobim.com/t/element-solids-get-different-result-for-a-family-with-two-direction/21698/1 "2018-05-07T07:15:40Z")

</div>

please see below image. that is the family was opened in revit.

 ![revit](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/f/6f3b078cb1e405979b9cbf478a0d2dd324ff9f01.PNG)

I create a simple dynamo file to generate the solids.

for the “vertical” cube, it looks the result is right.

 ![verticalcube](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/a/3a61b0dca643fd1bee3f29408cc766f5e91b5c17.PNG)

but for the “horizontal” cube, the result is not I expected.

 ![horizontalcube](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/9/39c96585d19253ba37a0c8fd3ac7f3fe5e96a5f1.PNG)

I attached my dyn and rfa file for your reference.[curve.dyn](https://forum.dynamobim.com/uploads/short-url/3Ylm3kNgRl9n9kfVmyZC1dDMwMM.dyn) (3.0 KB)  
[legalid.rfa](https://forum.dynamobim.com/uploads/short-url/m4Kw5d64j8XderAWTaT5SOmmk3X.rfa) (736 KB)

I guess maybe it caused by below two possible resaons  
1: the limitation of the element.solids function  
2: the definition of the family is not good.

however, I did not know how to troubleshooting it . your comments are appreciated. thank you.

-Ren

---

<div class="post-metadata">

**Author:** ![Nick\_Boyts](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/nick_boyts/32/76313_2.png) [@Nick\_Boyts](https://forum.dynamobim.com/u/Nick_Boyts)\
**Post date:** [May 7, 2018, 9:44pm UTC](https://forum.dynamobim.com/t/element-solids-get-different-result-for-a-family-with-two-direction/21698/2 "2018-05-07T21:44:53Z")

</div>

Unfortunately it’s a limitation of Dynamo/Revit.
