# Element.CutGeometry

**URL:** <https://forum.dynamobim.com/t/element-cutgeometry/95362>\
**Category:** Revit\
**Tags:** clockwork\
**Created:** [November 9, 2023, 11:37am UTC](https://forum.dynamobim.com/t/element-cutgeometry/95362 "2023-11-09T11:37:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![NERDASORUS](https://avatars.discourse-cdn.com/v4/letter/n/278dde/32.png) [@NERDASORUS](https://forum.dynamobim.com/u/NERDASORUS)\
**Post date:** [November 9, 2023, 11:37am UTC](https://forum.dynamobim.com/t/element-cutgeometry/95362/1 "2023-11-09T11:37:01Z")

</div>

Hello

when i wanted to cut two geometries, i used to use Element.CutGeometry from Clockwork 2.x  
i updated it today (2.6.0 from 2.3.0, and as you can see the definition is not there any more!

is there another node? is there a replacement from another package?

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/8/f8cfe73d07bbd9caf3c904bbab6d9acd58946d7f.png)

---

<div class="post-metadata">

**Author:** ![staylor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/staylor/32/94307_2.png) [@staylor](https://forum.dynamobim.com/u/staylor)\
**Post date:** [November 9, 2023, 2:23pm UTC](https://forum.dynamobim.com/t/element-cutgeometry/95362/2 "2023-11-09T14:23:34Z")

</div>

I installed the 2.6 and the definition was included. It may not have installed correctly. You may want to try and delete the package and reinstall it again. The definition is below that was included with Clockwork 2.6

[Element.CutGeometry.dyf](https://forum.dynamobim.com/uploads/short-url/nPUMphJsKrdnKv7hm0siPjSuMq3.dyf) (9.5 KB)