# Electrical Voltage Parameters - Need help with Voltage Values

**URL:** <https://forum.dynamobim.com/t/electrical-voltage-parameters-need-help-with-voltage-values/5662>\
**Category:** Revit\
**Created:** [August 16, 2016, 3:02pm UTC](https://forum.dynamobim.com/t/electrical-voltage-parameters-need-help-with-voltage-values/5662 "2016-08-16T15:02:31Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Shane\_Evens](https://avatars.discourse-cdn.com/v4/letter/s/3bc359/32.png) [@Shane\_Evens](https://forum.dynamobim.com/u/Shane_Evens)\
**Post date:** [August 16, 2016, 3:51pm UTC](https://forum.dynamobim.com/t/electrical-voltage-parameters-need-help-with-voltage-values/5662/3 "2016-08-16T15:51:25Z")

</div>

That worked perfectly for reading the values, Is there a known way to now place number values to an “Electrical Potential” type parameter in Revit?

The one I am struggling with is the 4.19 number calculated in Dynamo that needs to get back to Revit as 4.19V.

Thank you!

---

_[View the full topic](https://forum.dynamobim.com/t/electrical-voltage-parameters-need-help-with-voltage-values/5662)._