# Dynamo Union Solids

**URL:** <https://forum.dynamobim.com/t/dynamo-union-solids/19658>\
**Category:** Revit\
**Created:** [March 5, 2018, 3:35am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658 "2018-03-05T03:35:05Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Will](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@Will](https://forum.dynamobim.com/u/Will)\
**Post date:** [March 5, 2018, 3:35am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/1 "2018-03-05T03:35:05Z")

</div>

Hi all, I have a list of solid and I want to union them one by one, is there any simply way to achieve it using dynamo?

The node solid.byunion often occurs warning and return “unll” as a result, therefore, I want to do it separately.

The only method I can think of is shown is the diagram but it is not quite possible when there are large number of solids i have to union. Is there any “for loop” in dynamo whcih I can achieve the same?

Thank you very much.

 ![Union%20Solid](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/c/7cda8a43f2de4516e616428ef74335c38d32dda7.PNG)

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [March 5, 2018, 3:55am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/2 "2018-03-05T03:55:45Z")

</div>

Hi @Will

Use Solid.ByUnion

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/9/59e1cfe2078f02109cd1c37dc108e1b053717690.png)

---

<div class="post-metadata">

**Author:** ![Will](https://avatars.discourse-cdn.com/v4/letter/w/90ced4/32.png) [@Will](https://forum.dynamobim.com/u/Will)\
**Post date:** [March 5, 2018, 5:02am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/3 "2018-03-05T05:02:53Z")

</div>

Hi Kulkul,

I have tried solid.byunion before. However, in some cases, warning occurs and the output is “Null” (See Diagram). I want to avoid this from happening. That’s why I intend to union them one by one.

Is there any ways to do it?

 ![Warning](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/8/28a537ee395cff176160d4e94622b765f691db96.PNG)

---

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [March 5, 2018, 5:05am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/4 "2018-03-05T05:05:44Z")

</div>

Could you drop relevant files here? If you unable to drop then drop it in one of the dropbox services and share the link here.

---

<div class="post-metadata">

**Author:** ![ehall](https://avatars.discourse-cdn.com/v4/letter/e/34f0e0/32.png) [@ehall](https://forum.dynamobim.com/u/ehall)\
**Post date:** [August 2, 2021, 3:16pm UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/5 "2021-08-02T15:16:00Z")

</div>

This might be too late, but I had a similar error with the same node (although my error said: “Solid.ByUnion operation failed. Unable union two Solids : INCONS\_VERT\_ATT – inconsistent information in vertex and coedge attributes”.

I solved it by converting the list of solids into PolySurfaces, then converting those PolySurfaces back into Solids before doing the solid by union node again. I can’t explain why this worked, but might be worth trying if you never resolved your initial question.

If someone else can explain why my solution worked, that would be appreciated. I notice that with some of the lists of solids, additional solids were added. I’m guessing that’s a clue about why this works, but I really don’t know.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/2/026950bcf2ecb8a2515775ca9f70e624b1cbf110.png)

---

<div class="post-metadata">

**Author:** ![ball.wu](https://avatars.discourse-cdn.com/v4/letter/b/2acd7d/32.png) [@ball.wu](https://forum.dynamobim.com/u/ball.wu)\
**Post date:** [January 21, 2025, 6:53am UTC](https://forum.dynamobim.com/t/dynamo-union-solids/19658/6 "2025-01-21T06:53:02Z")

</div>

Thanks so much for the advice.
